[Linux-PowerEdge] Integrated dual SD card module

Stefan M. Radman smr at kmi.com
Tue Dec 10 17:20:22 CST 2019


[EXTERNAL EMAIL] 

Hi Ben,

No, it was always in BIOS boot mode but neither BIOS nor UEFI "see" any SD cards on the USB bus.

Stefan

On Nov 23, 2019, at 22:57, Emerson, Ben <Ben.Emerson at dbsantasalo.com<mailto:Ben.Emerson at dbsantasalo.com>> wrote:

Is your UEFI boot option still enabled?

Get Outlook for iOS<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=02%7C01%7Csmr%40kmi.com%7C768dc1de808242ed6d8208d7706022f8%7Cc2283768b8d34e008f3d85b1b4f03b33%7C0%7C0%7C637101430537341817&sdata=9NMTw7H92PW5EqyRf2mwESJTZ7Cz3HQa9lhOkwqJjDw%3D&reserved=0>
________________________________
From: Linux-PowerEdge <linux-poweredge-bounces at dell.com<mailto:linux-poweredge-bounces at dell.com>> on behalf of Peter Brunnengraeber <pbrunnen at bccglobal.com<mailto:pbrunnen at bccglobal.com>>
Sent: Saturday, November 23, 2019 7:18:48 PM
To: Stefan M. Radman <smr at kmi.com<mailto:smr at kmi.com>>
Cc: linux-poweredge at dell.com<mailto:linux-poweredge at dell.com> <linux-poweredge at dell.com<mailto:linux-poweredge at dell.com>>
Subject: Re: [Linux-PowerEdge] Integrated dual SD card module


[EXTERNAL EMAIL]

Hello Stefan,
  I haven't run across that particular scenario, but I have seen strange behaviors with the SD modules before. Out of curiosity, have you tried disconnecting all power to the chassis for +30sec to see if a BCM reset helps?  If not, try this and then check the boot options in the BIOS.

Good luck!

-With kind regards,
 Peter Brunnengräber

----- Original Message -----
Date: Sat, 23 Nov 2019 17:55:48 +0000
From: "Stefan M. Radman" <smr at kmi.com<mailto:smr at kmi.com>>
To: "<linux-poweredge at dell.com<mailto:linux-poweredge at dell.com>>" <linux-poweredge at dell.com<mailto:linux-poweredge at dell.com>>
Subject: [Linux-PowerEdge] Integrated dual SD card module
Message-ID: <899EA8E7-EFB4-4EB4-A3AF-E2DC4E0840F7 at kmi.com<mailto:899EA8E7-EFB4-4EB4-A3AF-E2DC4E0840F7 at kmi.com>>
Content-Type: text/plain; charset="us-ascii"


[EXTERNAL EMAIL]

Recently I updated the firmware on an R630 through the life cycle controller, including the firmware of the IDSDM.

Since the update, the SD cards no longer show up as a boot option and the host no longer boots the ESXi installed on them.

The server firmware is fully up to date, the iDRAC show the IDSDM firmware version (1.7) and two healthy SD cards but the host does not see them on the bus.

BIOS 2.10.5
iDRAC & LCC 2.70.70.70
IDSDM 1.7

I have already tried re-installing the IDSDM firmware (through LCC) but that didn't help.
DSU shows the IDSDM in the inventory but Dell support live image does not show any USB storage.

Does anyone have a hint for me?

Thanks

Stefan



------------------------------


_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com<mailto:Linux-PowerEdge at dell.com>
https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.us.dell.com%2Fmailman%2Flistinfo%2Flinux-poweredge&data=02%7C01%7CBen.Emerson%40dbsantasalo.com%7Ca1d4344c409c46b9605408d7704a08ab%7C703881f14a8d40cca22761817e51328a%7C1%7C0%7C637101335596206785&sdata=%2BYjrMIeq6MaVvXLJaKXx6MWAqT3%2Bxg2bDbJBfR8bxvs%3D&reserved=0<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.us.dell.com%2Fmailman%2Flistinfo%2Flinux-poweredge&data=02%7C01%7Csmr%40kmi.com%7C768dc1de808242ed6d8208d7706022f8%7Cc2283768b8d34e008f3d85b1b4f03b33%7C0%7C0%7C637101430537351814&sdata=fbMtDO77clpe0P2ftPO%2F%2B%2FI4dxn1evjdM8FapLeFCB8%3D&reserved=0>

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com<mailto:Linux-PowerEdge at dell.com>
https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.us.dell.com%2Fmailman%2Flistinfo%2Flinux-poweredge&data=02%7C01%7CBen.Emerson%40dbsantasalo.com%7Ca1d4344c409c46b9605408d7704a08ab%7C703881f14a8d40cca22761817e51328a%7C1%7C0%7C637101335596206785&sdata=%2BYjrMIeq6MaVvXLJaKXx6MWAqT3%2Bxg2bDbJBfR8bxvs%3D&reserved=0<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.us.dell.com%2Fmailman%2Flistinfo%2Flinux-poweredge&data=02%7C01%7Csmr%40kmi.com%7C768dc1de808242ed6d8208d7706022f8%7Cc2283768b8d34e008f3d85b1b4f03b33%7C0%7C0%7C637101430537351814&sdata=fbMtDO77clpe0P2ftPO%2F%2B%2FI4dxn1evjdM8FapLeFCB8%3D&reserved=0>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20191210/5463b477/attachment-0001.html>


More information about the Linux-PowerEdge mailing list