[Linux-PowerEdge] off topic - PowerEdge & Solarflare SFC9000
Stefan M. Radman
smr at kmi.com
Wed Jul 11 11:31:58 CDT 2018
You wrote "one box gets shoot in the head".
Are you running the Pacemaker cluster framework with Corosync and STONITH?
> On Jul 11, 2018, at 6:03 PM, lejeczek <peljasz at yahoo.co.uk> wrote:
> hi guys
> I wonder if any of you might be using SFC9000(same firmware everywhere, Centos 7.5 too) with your poweredge. I'm on r815.
> I'm trying poor man's setup to get the servers onto 10GbE network.
> Setup is such that three R815 are connected to each other, each has one Solarflare(SFP ports) and each Solarflare is set as net-team(both ports on a card are net-team device) with runner in broadcast mode. And it all seems to work, they ping each other, iperf okey.
> The problem, big problem is that when traffic start to flow between all three servers simultaneously, with rsync for example, then!! one box gets shoot in the head, hard reset, gone.
> Now, I know you would normally put it via a switch, but like I said: poor man's config, but you would not expect system to die like this neither, right?
> many thanks, L.
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
More information about the Linux-PowerEdge