[Linux-PowerEdge] off topic - PowerEdge & Solarflare SFC9000
peljasz at yahoo.co.uk
Wed Jul 11 11:03:21 CDT 2018
I wonder if any of you might be using SFC9000(same firmware everywhere,
Centos 7.5 too) with your poweredge. I'm on r815.
I'm trying poor man's setup to get the servers onto 10GbE network.
Setup is such that three R815 are connected to each other, each has one
Solarflare(SFP ports) and each Solarflare is set as net-team(both ports
on a card are net-team device) with runner in broadcast mode. And it all
seems to work, they ping each other, iperf okey.
The problem, big problem is that when traffic start to flow between all
three servers simultaneously, with rsync for example, then!! one box
gets shoot in the head, hard reset, gone.
Now, I know you would normally put it via a switch, but like I said:
poor man's config, but you would not expect system to die like this
many thanks, L.
More information about the Linux-PowerEdge