[Linux-PowerEdge] EXT :Re: dsu does not show/see all NICs?

Gottloeb, Jeff [US] (ES&CSO) jeffrey.gottloeb at ngc.com
Fri Oct 27 11:25:54 CDT 2017


If you have disabled loading the usb-storage kernel module in an /etc/modprobe.d/ file, temporarily enable it and re-run dsu.  The inventory collector needs this to collect certain bits of info.



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: lejeczek <peljasz at yahoo.co.uk>
Date: 10/27/17 6:15 AM (GMT-08:00)
To:
Cc: linux-poweredge-Lists <linux-poweredge at lists.us.dell.com>
Subject: EXT :Re: [Linux-PowerEdge] dsu does not show/see all NICs?

thanks for the info.
I'm not in hurry to update firmware, inasmuch as I'd like to
know why dsu does not do its job here.
Therefore it was @dell in the first place.
especially:
Getting System Inventory ...
warning: Inventory collector returned with partial failure.
<= HERE

omsa, omreport sees all NICs, and dsu fails.


On 27/10/17 12:23, Rene Shuster wrote:
> Try downloading and manually running v10.01.00 (
> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=7N5GW
> ) and see if it recognizes and updates the card. If not
> fall back to v8.07.26 (
> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=82J79
> ) and if that doesn't work either use the last released
> version before QLOGIC took over and thats v7.12.19 (
> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=35RF5
> ). All three support flavors of 5709, but as they come
> with different DEV_IDs and SUBSYS_IDs some models might
> have been dropped during the firmware development. The
> (Windows-only! Why?) Repository Manager usually shows the
> PCIDs in the properties of each firmware, so that could be
> a way to verify.
>
> On Fri, Oct 27, 2017 at 6:23 AM, lejeczek
> <peljasz at yahoo.co.uk <mailto:peljasz at yahoo.co.uk>> wrote:
>
>     hi everyone
>
>     @dell
>
>     In my r815s(plural) I have three NICs in total,
>     embedded 4-port, and two more, like this:
>
>     $ lspci | grep -i net
>     01:00.0 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>     01:00.1 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>     02:00.0 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>     02:00.1 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>     06:00.0 Ethernet controller: Broadcom Limited
>     NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)
>     06:00.1 Ethernet controller: Broadcom Limited
>     NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)
>     06:00.2 Ethernet controller: Broadcom Limited
>     NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)
>     06:00.3 Ethernet controller: Broadcom Limited
>     NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)
>     23:00.0 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>     23:00.1 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>     24:00.0 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>     24:00.1 Ethernet controller: Broadcom Limited
>     NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
>
>     Yet! output of dsu is this:
>
>     $ dsu --inventory
>     DELL EMC System Update 1.5.0
>     Copyright (C) 2014 DELL EMC Proprietary.
>     Verifying catalog installation ...
>     Installing catalog from repository ...
>     Fetching dsucatalog ...
>     Reading the catalog ...
>     Verifying inventory collector installation ...
>     Getting System Inventory ...
>     warning: Inventory collector returned with partial
>     failure.
>
>     1. OpenManage Server Administrator  ( Version : 8.5.0 )
>
>     2. BIOS  ( Version : 3.2.2 )
>
>     3. Dell LifeCycle Controller v1.7.5, 1.7.5.4, A00  (
>     Version : 1.7.5.4 )
>
>     4. Dell 32 Bit Diagnostics, version 5162 Installer
>     Revision 14.05.00, 5162A0, 5162.1  ( Version : 5162A0 )
>
>     5. iDRAC6  ( Version : 2.90 )
>
>     6. Power Supply  ( Version : M1.01.04 )
>
>     7. Power Supply  ( Version : M1.01.04 )
>
>     8. NetXtreme BCM5719 Gigabit Ethernet PCIe rev 01
>     (p2p1)  ( Version : 7.10.64 )
>
>     9. NetXtreme BCM5719 Gigabit Ethernet PCIe rev 01
>     (p2p2)  ( Version : 7.10.64 )
>
>     10. NetXtreme BCM5719 Gigabit Ethernet PCIe rev 01
>     (p2p3)  ( Version : 7.10.64 )
>
>     11. NetXtreme BCM5719 Gigabit Ethernet PCIe rev 01
>     (p2p4)  ( Version : 7.10.64 )
>
>     12. QLogic QLE2462 Adapter  ( Version : 02.23.06 )
>
>     13. QLogic QLE2462 Adapter  ( Version : 02.23.06 )
>
>     Exiting DSU!
>
>
>     Is above all? Is above correct?
>
>     many thanks, L.
>
>     _______________________________________________
>     Linux-PowerEdge mailing list
>     Linux-PowerEdge at dell.com <mailto:Linux-PowerEdge at dell.com>
>     https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
>
>
>
> --
> Tech III * AppControl * Endpoint Protection * Server
> Maintenance
> Buncombe County Schools Technology Department Network Group
> ComicSans Awareness Campaign <http://comicsanscriminal.com>

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20171027/c96e6e55/attachment.html>


More information about the Linux-PowerEdge mailing list