[Linux-PowerEdge] OMSA reports nothing with omreport or the webpage

Zurd zurd33 at gmail.com
Fri Aug 12 08:19:31 CDT 2016


Now working! Thanks!


On Fri, Aug 12, 2016 at 6:05 AM, <Souvik_Bose at dell.com> wrote:

> Dell - Internal Use - Confidential
> Hi,
>
> If Customer installs OMSA 8.3 in an unsupported OS, it might fail because
> of NVMe implementation. But, you can suppress loading NVMe library by using
> the following steps to avoid any crash.
>
> Please do the following steps for disabling psrvil which is required for
> detecting NVMe Devices:
>
> 1.       To stop all the services, please execute the command -
> srvadmin-services.sh stop
>
> 2.       Go to /opt/dell/srvadmin/etc/srvadmin-storage/ directory
>
> 3.       Open stsvc.ini file
>
> 4.       Please comment the line - vil7=dsm_sm_psrvil. For commenting it
> out, you need to write “;” and one space before the statement, like “;
> vil7=dsm_sm_psrvil”
>
> 5.       Save and close stsvc.ini file
>
> 6.       To start all the services, please execute the command -
> srvadmin-services.sh start
>
> It will stop loading psrvil library and OMSS should work fine.
>
> Note: After commenting out psrvil library in stsvc.ini file, NO NVMe
> devices will get detected by OMSA
>
> Thanks
> Souvik
>
> From: linux-poweredge-bounces-Lists On Behalf Of Zurd
> Sent: Friday, August 12, 2016 4:32 AM
> To: linux-poweredge-Lists <linux-poweredge at lists.us.dell.com>
> Subject: [Linux-PowerEdge] OMSA reports nothing with omreport or the
> webpage
>
> Hi, I can install OMSA just fine but it's not reporting anything, for
> example, the command:
> omreport chassis fans
> reports:
> Error! No fan probes found on this system.
>
> The OMSA webpage is empty saying:
> System Components Information is not available for this platform.
> There's also this file missing:
> /opt/dell/srvadmin/var/lib/openmanage/log/dcsys64.xml
>
> This is CentOS 7 running on a PowerEdge R330 (13th Generation) with OMSA
> 8.3.0.
> Installation:
> yum update
> wget -q -O - http://linux.dell.com/repo/hardware/dsu/bootstrap.cgi | bash
> yum install dell-system-update
> dsu  # nothing to update, all latest
> yum install srvadmin-all
> (Log off and log on)
>
> srvadmin-services.sh start
>   Starting instsvcdrv (via systemctl):                       [  OK  ]
>   Starting dataeng (via systemctl):                          [  OK  ]
>   Starting dsm_om_shrsvc (via systemctl):                    [  OK  ]
>   Starting dsm_om_connsvc (via systemctl):                   [  OK  ]
>
> System:
>  inxi -Fxz
> System:    Host: venus.mobilite.local Kernel: 3.10.0-327.28.2.el7.x86_64
> x86_64 (64 bit gcc: 4.8.3)
>            Console: tty 0 Distro: CentOS Linux release 7.2.1511 (Core)
> Machine:   System: Dell product: PowerEdge R330
>            Mobo: Dell model: 0H5N7P v: A01 Bios: Dell v: 1.3.2 date:
> 03/28/2016
> CPU:       Quad core Intel Xeon E3-1220 v5 (-HT-MCP-) cache: 8192 KB
>            flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips:
> 23992
>            clock speeds: max: 3500 MHz 1: 900 MHz 2: 900 MHz 3: 1574 MHz
> 4: 900 MHz
> Graphics:  Card: Matrox Systems G200eR2 bus-ID: 08:00.0
>            Display Server: N/A driver: N/A tty size: 168x44 Advanced Data:
> N/A for root out of X
> Network:   Card-1: Broadcom NetXtreme BCM5720 Gigabit Ethernet PCIe
> driver: tg3 v: 3.137 bus-ID: 04:00.0
>            IF: em1 state: up speed: 100 Mbps duplex: full mac: <filter>
>            Card-2: Broadcom NetXtreme BCM5720 Gigabit Ethernet PCIe
> driver: tg3 v: 3.137 bus-ID: 04:00.1
>            IF: em2 state: up speed: 100 Mbps duplex: full mac: <filter>
> Drives:    HDD Total Size: 1199.1GB (1.6% used) ID-1: /dev/sda model:
> PERC_H730_Adp size: 1199.1GB temp: 0C
> Partition: ID-1: / size: 50G used: 5.3G (11%) fs: xfs dev: /dev/dm-0
>            ID-2: /boot size: 497M used: 168M (34%) fs: xfs dev: /dev/sda1
>            ID-3: swap-1 size: 8.46GB used: 0.00GB (0%) fs: swap dev:
> /dev/dm-1
> RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
> Sensors:   System Temperatures: cpu: 27.0C mobo: N/A
>            Fan Speeds (in rpm): cpu: N/A
> Info:      Processes: 173 Uptime: 39 min Memory: 629.9/15845.9MB Init:
> systemd runlevel: 3 Gcc sys: 4.8.5
>            Client: Shell (bash 4.2.461) inxi: 2.3.0
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20160812/366318a6/attachment-0001.html 


More information about the Linux-PowerEdge mailing list