[Linux-PowerEdge] Update Broadcom FW

Supporto Tecnico - Crazy Network support at crazynetwork.it
Mon Jan 14 04:05:54 CST 2013


Hi,

i did update OMSA to 7.2 and new avaible firmwares came up but i'm 
facing an issue on updates (actually Broadcom, dont know the other cause 
updates stop on first error), here is the verbose output:

Found firmware which needs to be updated.

Running updates...
hey, we are supposed to be installing now... :)
/       Installing 
pci_firmware(ven_0x14e4_dev_0x1639_subven_0x1028_subdev_ ...loading xml 
from: /usr/libexec/dell_dup/BROADCOM_FRMW/PIEConfig.xml
loaded.
         Plugin command is dup_prg -force
         Output file is brcmfwprgmr.xml
         Plugin timeout is 3600
|       Installing 
pci_firmware(ven_0x14e4_dev_0x1639_subven_0x1028_subdev_ ...output from 
the cmd was:
<?xml version="1.0" encoding="UTF-8"?>
<SVMExecution lang="en">
         <Device vendorID="14e4" deviceID="1639" subVendorID="1028" 
subDeviceID="0236" bus="1" device="0" function="0" display="NetXtreme II 
BCM5709 Gigabit Ethernet rev 20 (eth0)">
                 <Application componentType="FRMW" version="7.0.47" 
display="NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth0)">
                         <Package version="7.0.47"/>
                         <SPStatus result="false">
                                 <Message id="8">Update failure. 
Firmware programming utility returned an error.</Message>
                         </SPStatus>
                 </Application>
         </Device>
         <Device vendorID="14e4" deviceID="1639" subVendorID="1028" 
subDeviceID="0236" bus="1" device="0" function="1" display="NetXtreme II 
BCM5709 Gigabit Ethernet rev 20 (eth1)">
                 <Application componentType="FRMW" version="7.0.47" 
display="NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth1)">
                         <Package version="7.0.47"/>
                         <SPStatus result="false">
                                 <Message id="8">Update failure. 
Firmware programming utility returned an error.</Message>
                         </SPStatus>
                 </Application>
         </Device>
         <Device vendorID="14e4" deviceID="1639" subVendorID="1028" 
subDeviceID="0236" bus="2" device="0" function="0" display="NetXtreme II 
BCM5709 Gigabit Ethernet rev 20 (eth2)">
                 <Application componentType="FRMW" version="7.0.47" 
display="NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth2)">
                         <Package version="7.0.47"/>
                         <SPStatus result="false">
                                 <Message id="8">Update failure. 
Firmware programming utility returned an error.</Message>
                         </SPStatus>
                 </Application>
         </Device>
         <Device vendorID="14e4" deviceID="1639" subVendorID="1028" 
subDeviceID="0236" bus="2" device="0" function="1" display="NetXtreme II 
BCM5709 Gigabit Ethernet rev 20 (eth3)">
                 <Application componentType="FRMW" version="7.0.47" 
display="NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth3)">
                         <Package version="7.0.47"/>
                         <SPStatus result="false">
                                 <Message id="8">Update failure. 
Firmware programming utility returned an error.</Message>
                         </SPStatus>
                 </Application>
         </Device>
         <RebootRequired>1</RebootRequired>
</SVMExecution>

/       Installing 
pci_firmware(ven_0x14e4_dev_0x1639_subven_0x1028_subdev_ ...Update 
failure. Firmware programming utility returned an error.
None
Installation failed for package: 
pci_firmware(ven_0x14e4_dev_0x1639_subven_0x1028_subdev_0x0236) - 7.4.8
aborting update...

The error message from the low-level command was:

Update failure. Firmware programming utility returned an error.
Complete!


Does anyone can help me figure out the issue and how i can solve it?

Thanks

Best regards
-- 
Andrea Iannucci
----------------------------

----------------------------
Crazy Network di Iannucci Andrea
Viale G.B. Lulli, 24
00050 Cerveteri - RM
(w) www.crazynetwork.it
(e) andrea.iannucci at crazynetwork.it
(t) +39 06 62279876
(f) +39 06 62298767
(m) +39 338 8552885

-------------------------------------------------------------------------------
Please consider our enviromental responsabilità before printing this 
E-Mail. Thank you.
-------------------------------------------------------------------------------
Questo messaggio di posta elettronica contiene informazioni di carattere 
confidenziale rivolte esclusivamente al destinatario sopra indicato.
E' vietato l'uso, la diffusione, distribuzione o riproduzione da parte 
di ogni altra persona. Nel caso aveste ricevuto questo messaggio di 
posta elettronica per errore, siete pregati di segnalarlo immediatamente 
al mittente e distruggere quanto ricevuto (compresi i file allegati) 
senza farne copia.
Qualsivoglia utilizzo non autorizzato del contenuto di questo messaggio 
costituisce violazione dell'obbligo di non prendere cognizione della 
corrispondenza tra altri soggetti, salvo più grave illecito, ed espone 
il responsabile alle relative conseguenze.
--------------------------------------------------------------------------------
This e-mail is confidential and may also contain privileged information. 
If you are not the intended recipient you are not authorised to read, 
print, save, process or disclose this message. If you have received this 
message by mistake, please inform the sender immediately and delete this 
e-mail, its attachments and any copies.
Any use, distribution, reproduction or disclosure by any person other 
than the intended recipient is strictly prohibited and the person 
responsible may incur penalties.
-------------------------------------------------------------------------------- 




More information about the Linux-PowerEdge mailing list