omsa6.5 PE_C6145 and no controllers

Martin Flemming martin.flemming at desy.de
Fri Feb 24 15:49:05 CST 2012


Thanks for the link, was not know by me :-)

cheers,
 	martin

On Fri, 24 Feb 2012, Kaj Niemi wrote:

> C-series isn't supported/covered by OMSA at all instead you can get MegaCli from LSI that lets you look at the card. Also do take a look at http://poweredgec.com/ as it contains some goodies and examples.
>
> HTH
>
>
>
> Kaj
> -- 
> Kaj J. Niemi
> <kajtzu at basen.net>
> FI +358 45 63 12000
>
>
>
> On Feb 22, 2012, at 11:50, martin.flemming at desy.de wrote:
>
>>
>> Hi !
>>
>> We've got a PowerEdge_C6145 with ScientificLinux6 running but it
>> seems that OMSA6.5 dosen't support the controller :-(
>>
>> The contoller is
>> 03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
>>
>> the messages is
>>
>> Server Administrator: Storage Service EventID: 2314  The initialization
>> sequence of SAS components failed during system startup. SAS management
>> and monitoring is not possible.
>>
>>  omreport storage controller
>> No controllers found
>>
>>
>> Till this time i found only this but without answer/reaction :-(
>>
>> http://lists.us.dell.com/pipermail/linux-poweredge/2011-September/045300.html
>>
>>
>> Any hints are welcome ...
>>
>> thanks & cheers,
>>
>> 	martin
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
>



More information about the Linux-PowerEdge mailing list