Help with multipath failover

Brian O'Mahony brian.omahony at curamsoftware.com
Wed Mar 31 13:02:28 CDT 2010


Ping to san ip and yanking a cable....
------------------------
Sent from my BlackBerry Wireless Handheld


----- Original Message -----
From: Charles Riley <criley at erad.com>
To: Brian O'Mahony
Sent: Wed Mar 31 18:34:12 2010
Subject: Re: Help with multipath failover

How are you determining that it doesn't fail over?

Charles Riley
eRAD, Inc.


----- "Brian O'Mahony" <brian.omahony at curamsoftware.com> wrote:

> Im connecting a PE2850 to a Equalogic SAN, using multipath. I have a
> PCI NIC with one connection to the SAN and one from the onboard
> controller too. The SAN is ona different network, and is at IP
> 10.10.20.10.
> 
> 
> 
> Here is the output from the multipath –ll
> 
> [root at ccvobtest2850 ~]# multipath -ll
> 
> DubSanGrp01VolCC (36090a048d03f308d51b1f47c000030a6) dm-18
> EQLOGIC,100E-00
> 
> [size=500G][features=1 queue_if_no_path][hwhandler=0][rw]
> 
> \_ round-robin 0 [prio=1][enabled]
> 
> \_ 3:0:0:0 sdc 8:32 [active][ready]
> 
> \_ round-robin 0 [prio=1][enabled]
> 
> \_ 4:0:0:0 sdd 8:48 [active][ready]
> 
> 
> 
> 
> 
> 
> 
> And here is the multipath.conf:
> 
> [root at ccvobtest2850 ~]# cat /etc/multipath.conf
> 
> ## Use user friendly names, instead of using WWIDs as names.
> 
> defaults {
> 
> user_friendly_names yes
> 
> }
> 
> blacklist {
> 
> # wwid 26353900f02796769
> 
> # devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
> 
> # devnode "^hd[a-z]"
> 
> # devnode "^sd[a-b]"
> 
> }
> 
> multipaths {
> 
> multipath {
> 
> wwid 36090a048d03f308d51b1f47c000030a6
> 
> alias DubSanGrp01VolCC
> 
> }
> 
> }
> 
> devices {
> 
> device {
> 
> vendor "EQLOGIC"
> 
> product "100E-00"
> 
> path_grouping_policy failover
> 
> getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
> 
> features "1 queue_if_no_path"
> 
> path_checker readsector0
> 
> failback immediate
> 
> path_selector "round-robin 0"
> 
> rr_min_io 10
> 
> rr_weight priorities
> 
> }
> 
> }
> 
> 
> 
> 
> 
> However when I unplug the cable to eth1, it doesn’t failover. I am
> testing with a ping to the SAN at 10.10.20.10. As Im pretty new to all
> this, was wondering if anyone has any pointers on where I am going
> wrong.
> 
> 
> 
> Thanks
> 
> Brian
> 
> 
> 
> The information in this email is confidential and may be legally
> privileged.
> It is intended solely for the addressee. Access to this email by
> anyone else
> is unauthorized. If you are not the intended recipient, any
> disclosure,
> copying, distribution or any action taken or omitted to be taken in
> reliance
> on it, is prohibited and may be unlawful. If you are not the intended
> addressee please contact the sender and dispose of this e-mail. Thank
> you. 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq


The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else
is unauthorized. If you are not the intended recipient, any disclosure,
copying, distribution or any action taken or omitted to be taken in reliance
on it, is prohibited and may be unlawful. If you are not the intended
addressee please contact the sender and dispose of this e-mail. Thank you.



More information about the Linux-PowerEdge mailing list