J. Epperson Dell at epperson.homelinux.net
Fri Mar 26 10:35:24 CDT 2010

On Fri, March 26, 2010 10:36, Patrick_Boyd at Dell.com wrote:
> Think of ENCLOSUREWARN as an event class. In other words, any enclosure
> event which is a warning (which is a severity level) triggers this LRA
> action. So in the doc that Mohan sent if you look at the Severity column
> in the table warnings will be called out by the value "Warning /
> Non-critical". As he said the best way to figure out what caused this is
> to look through your OMSA or your system log to find the event that
> triggered the email.

There's a Severity column in the "Event Message Reference" and in the
"Storage Management Message Reference".  In the former, enclosure refers
to fan enclosures, in the latter, disk enclosures.  Only the Storage
Management table uses the "Warning / Non-critical" tag, so you must mean
that one.  Knowing now that the AC had failed in the data center, I can
guess that the alert traces to event id 2100, an overtemp warning, but I'd
be hard pressed to figure that out from the alert, which might as well say
"A bad thing may be happening, please check your OMSA and system logs". 
Pretty strange that there weren't any temperature sensor or cooling device

> -----Original Message----- From: linux-poweredge-bounces-Lists On Behalf
> Of J. Epperson Sent: Friday, March 26, 2010 8:00 AM To:
> linux-poweredge-Lists Subject: RE: ENCLOSUREWARN
> On Fri, March 26, 2010 08:06, Mohan_G_Murali at dell.com wrote:
>> Hi Nick, Looks like you got an alert from the LRA you had set. Check
>> the alert log in OMSA to figure out what went wrong. And also check the
>> Enclosure and it's components in OMSA to see which component of
>> Enclosure had went wrong. Below is the message(alert) reference guide
>> which explains the alerts and corrective actions.
>> http://support.dell.com/support/edocs/software/svradmin/6.2/en/MSG/HTML
>> / msgch40.htm#wp1194853 Thanks, Mohan
>> -----Original Message----- From: linux-poweredge-bounces at dell.com
>> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Nick Lunt Sent:
>> Friday, March 26, 2010 5:03 PM To: linux-poweredge-Lists;
>> linux-poweredge-Lists Subject: ENCLOSUREWARN
>> Hi folks
>> in the docs the only mention I can find of ENCLOSUREWARN is the
>> following
>> Sets actions when an enclosure detects a warning value.
>> I've%

More information about the Linux-PowerEdge mailing list