OMSA ECC single bit correction logging disabled

Patrick_Fischer at Patrick_Fischer at
Thu Mar 18 04:29:50 CDT 2010


That means that to many SBE's occur in a too short period of time.
(Single bit errors in a Dimm => the dimm slot is mentioned in the HW log
you can access through bmc, drac, OMSA)

To avoid a log spam the logging for SBE's was disabled until the log was
cleared and a reboot was done.


IF you use a Generation 9 server check the System Bios if it is 2.61.

If possible (downtime) x-test the dimm with another to check if the
error follows the dimm and to isolate the slot.


If you can't x-test and the bios and bmc is up to date open a HW call.


From: linux-poweredge-bounces at
[mailto:linux-poweredge-bounces at] On Behalf Of Rene Rosenberger
Sent: Thursday, March 18, 2010 10:23 AM
To: linux-poweredge-Lists
Subject: OMSA ECC single bit correction logging disabled




what does it mean and how do i fix it?




Rene Rosenberger


-------------- next part --------------
An HTML attachment was scrubbed...

More information about the Linux-PowerEdge mailing list