PE2950

madunix madunix at gmail.com
Thu Feb 18 00:36:43 CST 2010


I made with your suggestion, Thanks ... it works now

On Wed, Feb 17, 2010 at 5:26 PM, Betka, Corey <betka at illinois.edu> wrote:
> I'm completely confused by the string of replies here, but I'll continue top posting.
>
> Going completely out on WAG here, but if you are using the SBUU CD to install an OS, uncheck the "Install OpenManage" checkbox and install it later. The OMSA install files aren't on the SBUU CD image and can lead to confusion as you go through the install process.
>
> If you are using the SBUU DVD image, I'm completely wrong, please ignore.
>
> Corey
>
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of madunix
> Sent: Wednesday, February 17, 2010 9:18 AM
> To: James Bensley
> Cc: linux-poweredge at lists.us.dell.com
> Subject: Re: PE2950
>
> yes, i did the above, adjusted the bios it can see all drives SAS
> 146G.... but when i insert dell managment and installatin bootable
> v5.4 and  adjust the raid start installation after 50% it ask again
> for open mange server administrator  v5.3 when i put the above
> requested CD ... it gave rejection.
>
> any help please.
> thanks
>
> On Tue, Feb 16, 2010 at 11:15 PM, James Bensley <jwbensley at gmail.com> wrote:
>>  Todd LaPittus <todd at lapittus.com> wrote:
>>> Sounds like you have a bunch of drives hanging off the controller that
>>> aren't part of a volume...
>>>
>>
>> Indeed, it sounds like you haven't entered the Perc controller BIOS to
>> setup your hardware raid first (so your running JBOD in effect).
>> Assuming you want a hardware raid you will need to make the raid and
>> initialise the disk first. If you want a software raid you may need
>> some controller drivers for the Perc controller.
>>
>> --
>> Regards,
>> James ;)
>>
>
>



More information about the Linux-PowerEdge mailing list