PowerEdge 1950 ECC question...

Henrik Schmiediche henrik at stat.tamu.edu
Wed Feb 3 10:33:04 CST 2010


Did that. The system is up using new RAM and OMSA and related utilities are
running. There are no memory related entries in the ESM log. Old ram freezes
system, but no error of any kind is generated in ESM, memtest, mpmemory,
dell diags.

   -Henrik

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Tino Schwarze
Sent: Wednesday, February 03, 2010 10:30 AM
To: linux-poweredge at dell.com; linux-poweredge at lists.us.dell.com
Subject: Re: PowerEdge 1950 ECC question...

On Wed, Feb 03, 2010 at 10:21:10AM -0600, Henrik Schmiediche wrote:

> I cannot get the node to startup to the point where OMSA runs. It freezes
on
> startup with the bad RAM.

Just take out all RAM (and note which DIMM was in which slot), insert
known-good RAM; then have a look at the ESM log. It will tell you where
the errors occured (exact DIMM location). Then move all other RAM in,
and perform a extensive memory test.

HTH,

Tino.

>   - Henrik
> 
> -----Original Message-----
> From: Ryan Miller [mailto:rmiller at smartertravelmedia.com] 
> Sent: Wednesday, February 03, 2010 10:19 AM
> To: Henrik Schmiediche; linux-poweredge at lists.us.dell.com
> Subject: RE: PowerEdge 1950 ECC question...
> 
> Are you running OMSA?  It usually is able to pinpoint which stick is the
> cause of single bit errors.  It can be helpful to stress the RAM with some
> heavy compiles/DMA to make the bad stick throw an SBE sooner.
> 
> > -----Original Message-----
> > From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-
> > bounces at dell.com] On Behalf Of Henrik Schmiediche
> > Sent: Wednesday, February 03, 2010 11:09 AM
> > To: linux-poweredge at lists.us.dell.com
> > Subject: PowerEdge 1950 ECC question...
> > 
> >      Hello,
> > Is it possible to turn ECC off on the PowerEdge 1950? I have servers
> > from
> > other manufacturer where this is possible, but I cannot find this
> > option in
> > the PE 1950. I'd like to test the memory with ECC turned off.
> > 
> > Here is Background:
> > 
> > I have a PowerEdge 1950 (one of over 100+ identical systems) that
> > freezes on
> > startup. I can reimage the node fine, the freeze on startup persists.
> > The
> > node passes Dell Diagnostics including overnight memory testing.
> > Nothing in
> > the ESM log.
> > 
> > I reseated the RAM and other components. No solution.
> > 
> > On a lark I decided to change all 8 memory sticks.. this solved the
> > problem!
> > The system starts up fine.
> > 
> > So it seems there is a bad memory module, but I have no idea which
> > ones. I
> > am trying to avoid the one-by-one (or batch-by-batch) testing method
> > and I
> > was thinking that (maybe) turning ECC off might help locate the bad
> > module.
> > 
> > Any ideas?
> > 
> >   - Henrik
> > 
> > 
> > _______________________________________________
> > Linux-PowerEdge mailing list
> > Linux-PowerEdge at dell.com
> > https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> > Please read the FAQ at http://lists.us.dell.com/faq
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq

-- 
"What we nourish flourishes." - "Was wir nähren erblüht."

www.lichtkreis-chemnitz.de
www.tisc.de

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq




More information about the Linux-PowerEdge mailing list