debian monitoring

P.A razor at meganet.net
Tue Apr 13 14:52:56 CDT 2010


Jeff, I did notice that and I'm using your tool now, but I wanted to use
megacli to get logs from the controller the same logs that I get in omsa or
using ipmitool -I open sel list - list log.

Good info below though.
Thanks, Paul

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Jefferson Ogata
Sent: Tuesday, April 13, 2010 2:19 PM
To: linux-poweredge at lists.us.dell.com
Subject: Re: debian monitoring

On 2010-04-13 16:56, P.A wrote:
> Prasana, thanks for the info, I actually  had downloaded this but it 
> does not come with MegaCLI which is shown on the example page you have 
> below. I don't think megactl and megacli are the same, someone correct 
> me if im wrong.

MegaCLI and megactl are definitely different. MegaCLI is the official 
configuration and inspection tool from LSI. megactl/megasasctl is an 
alternate program I authored that does some things MegaCLI does not do; 
in particular it uses SCSI passthrough to get info directly from the 
disks in a RAID so you can check error conditions at the drive 
controller level rather than the RAID controller level. It can also 
start disk self-tests and check their results.

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq



More information about the Linux-PowerEdge mailing list