SMART and PE2950?
Roehrig, Jack (John)
Jack.Roehrig at ask.com
Wed Sep 9 10:08:21 CDT 2009
MegaCLI will report health of individual disks on 2950s.
From: linux-poweredge-bounces at lists.us.dell.com [mailto:linux-poweredge-bounces at lists.us.dell.com] On Behalf Of Mircea Vutcovici
Sent: Tuesday, September 08, 2009 10:20 PM
To: Scott Ehrlich; linux-poweredge at lists.us.dell.com
Subject: Re: SMART and PE2950?
What you see from the OS is the virtual volume, a logical
representation of the RAID array.
The disks are monitored by PERC controller. Use/install OMSA to
monitor the disks
On 9/6/09, Scott Ehrlich <srehrlich at gmail.com> wrote:
> I have CentOS 5 installed on a few PE2950 systems. The SMART daemon
> claims the drives included with the server do not support SMART, which
> rather surprised me.
> What, then, are my options for monitoring the health of the server
> hard drives? It would be nice to have some service running I could
> email to myself on the status of each drive.
> Linux-PowerEdge mailing list
> Linux-PowerEdge at lists.us.dell.com
> Please read the FAQ at http://lists.us.dell.com/faq
Sent from my mobile device
Linux-PowerEdge mailing list
Linux-PowerEdge at lists.us.dell.com
Please read the FAQ at http://lists.us.dell.com/faq
More information about the Linux-PowerEdge