Need help in Teaming

Le C.T t.thanhcle at gmail.com
Sat Mar 21 11:12:57 CDT 2009


both files ... i meant to say ../network-scripts/eth0 and
../network-scripts/eth1  .. change the device name in the files accordingly.

On Sat, Mar 21, 2009 at 11:41 AM, <nitin.gizare at wipro.com> wrote:

>  HI
>
>
>
> About below settings
>
>
>
>    - vi /etc/sysconfig/network-scripts/eth<0-1>
>       - DEVICE=eth0 | eth1
>       - BOOTPROTO=none
>       - ONBOOT=yes
>       - MASTER=bond0
>       - SLAVE=yes
>       - USERCTL=no
>
> Do we need edit eth0 and eth1 or only one? Hope we need to edit both of
> them?
>
>
>
> Please log your queries/concerns/requests through
> http://edasupport.wipro.com or send mail to eda.support at wipro.com for
> quicker resolutions.
>
> Rgds
>
> Nitin
>   ------------------------------
>
> *From:* Nitin Gizare (WT01 - PES-SEM2-TEC)
> *Sent:* Saturday, March 21, 2009 9:08 PM
> *To:* Le C.T
> *Cc:* linux-poweredge at dell.com
> *Subject:* RE: Need help in Teaming
>
>
>
> HI
>
>
>
> Thanks million
>
>
>
> I will try u r steps
>
>
>
> Rgds
>
> Nitin
>
>
>  ------------------------------
>
> *From:* Le C.T [mailto:t.thanhcle at gmail.com]
> *Sent:* Sat 3/21/2009 7:28 PM
> *To:* Nitin Gizare (WT01 - PES-SEM2-TEC)
> *Cc:* linux-poweredge at dell.com
> *Subject:* Re: Need help in Teaming
>
> This is what I used to team 2 NICs (bmc5708) on our R900 running RHEL 5.2
> 64-bit. We are using active-passive config (mode=1)
>
>    - lsmod | grep bonding
>    - vi /etc/modprobe.conf:
>
>
>     - alias bond0 bonding
>
>
>    - vi /etc/sysconfig/networkscripts/ifconfig-bond0
>
>
>     - DEVICE=bond0
>       - BONDING_OPTS="mode=1 miimon=500"
>       - USERCTL=no
>       - ONBOOT=yes
>       - BOOTPROTO=none
>       - IPADDR=xxxxxxx
>       - NETMASK=xxx
>       - NETWORK=xx
>       - TYPE=Ethernet
>
>
>    - vi /etc/sysconfig/network-scripts/eth<0-1>
>
>
>     - DEVICE=eth0 | eth1
>       - BOOTPROTO=none
>       - ONBOOT=yes
>       - MASTER=bond0
>       - SLAVE=yes
>       - USERCTL=no
>
>
>    - service network restart
>    - ifconfig bond0
>
> You can check/verify by running nload on bond0, eth0, or eth1 to see if the
> traffic is distributed like the way it should.
>
> Check the redhat site for the RHEL admin guide ( I used the RHEL 5 guide)..
> or you can check it out here for more details ..
> http://www.linuxfoundation.org/en/Net:Bonding
>
> HTH.
>
> Tom
>
> On Sat, Mar 21, 2009 at 2:04 AM, <nitin.gizare at wipro.com> wrote:
>
> HI
>
>
>
> I have R900 with 4 NIC ‘s with RHEL 4.0 Up5.
>
> I would like implement teaming of N.W cards to boost  performance of N.W .
>
> Pls help in this regards
>
>
>
>
>
> Rgds
>
> Nitin
>
>
>
> *Please do not print this email unless it is absolutely necessary. *
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain proprietary, confidential or privileged information. If you are not
> the intended recipient, you should not disseminate, distribute or copy this
> e-mail. Please notify the sender immediately and destroy all copies of this
> message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses. The
> company accepts no liability for any damage caused by any virus transmitted
> by this email.
>
> www.wipro.com
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
>
>
>
> --
> Sent from my iPoopd
>
> * Please do not print this email unless it is absolutely necessary. *
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain proprietary, confidential or privileged information. If you are not
> the intended recipient, you should not disseminate, distribute or copy this
> e-mail. Please notify the sender immediately and destroy all copies of this
> message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses. The
> company accepts no liability for any damage caused by any virus transmitted
> by this email.
>
> www.wipro.com
>



-- 
Sent from my iPoopd
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20090321/20e1d484/attachment.htm 


More information about the Linux-PowerEdge mailing list