DRAC5 stoppedafter servers moved to data centre

Florent Gilain Florent.Gilain at direct-energie.com
Thu Sep 18 05:28:13 CDT 2008

True, and this is the same command to pass (racadm racreset ) when a firmware upgrade of DRAC fails in order to get DRAC working again...I had the problem when I tried to upgrade from an old firmware to the most recent one, I finally had to upgrade the DRAC using each intermediate firmware to reach the latest one ;-((

De : linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] De la part de Faris Raouf
Envoyé : jeudi 18 septembre 2008 12:22
À : 'Sid Young'; linux-poweredge at dell.com
Objet : RE: DRAC5 stoppedafter servers moved to data centre

We always had problems with the DRAC5 on our 1950s (same s 2950s really, aren't they?).

Try issuing a racadm racreset (I think) on the server itself if you still have SSH access.


From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Sid Young
Sent: 18 September 2008 02:59
To: linux-poweredge at dell.com
Subject: DRAC5 stoppedafter servers moved to data centre

G'Day All,

I had 9 DEL2950 servers in a rack behind a firewall, all with working DRAC interface and this week I moved them out to a data center, I can log into the DRAC interface but the console redirection now fails with "Attempting Connection"... it was working for 2 months before the move, being used every day by myself so I didn't have to walk to the consoles but now the servers are live, it fails on all servers. No IP change, no firewall rule changes, I'm really puzzled as to what it is..

Any ideas.... Anyone???


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20080918/e68a1e1d/attachment.htm 

More information about the Linux-PowerEdge mailing list