Perc 3di question

Hank heskin at gmail.com
Wed Sep 3 07:21:55 CDT 2008


Problem solved.

I got another container failure and auto-rebuild task today, but the server
is still operational this time, so I was able to issue a "diagnostic show
history" and looks like drive (0:1:0) is the suspect bad drive (see output
below).

Thanks again for your help.
-Hank

[00]: <<<ID(1:12:0) - starting SELTO Fail Code >>>
[01]: <<<ID(1:13:0) - starting SELTO Fail Code >>>
[02]: <<<ID(1:14:0) - starting SELTO Fail Code >>>
[03]: <<<ID(1:15:0) - starting SELTO Fail Code >>>
[04]: BatteryStatus: battery OK!
[05]: Battery charge is now OK
[06]: WriteCache: out of NVERROR, into the NVUP state!
[07]: EventMonitor - start transactions
[08]: WC_StartXact: begin
[09]: WC_StartXact: flushing 0 dirty buffers
[10]: WC_StartXact: nvflushdev returns 0
[11]: WC_StartXact: calling Broker_Recover
[12]: Broker_Recover: recover client 1
[13]: CopyOnWrite_NVR_Recover: ROUTINE CALLED.
[14]: Broker_Recover: client returns 0
[15]: Broker_Recover: recover client 3
[16]: Raw_NVR_Recover: ROUTINE CALLED.
[17]: Broker_Recover: client returns 0
[18]: WC_StartXact: Broker_Recover returns 0
[19]: NV transactions started successfully
[20]: Mirror Scrub Container:0   ErrorsFound:0
[21]: Clear disk log: sector - 80, driveno 0
[22]: Clear disk log: sector - 80, driveno 1
[23]: Container 0 completed REBUILD task:
[24]: ID(0:01:0); Error Event [command:0x28]
[25]: ID(0:01:0); Medium Error [k:0x3,c:0x11,q:0x1]
[26]: ID(0:01:0); Read Retries Exhausted
[27]:
[28]: ID(0:01:0); Error Event [command:0x28]
[29]: ID(0:01:0); Medium Error [k:0x3,c:0x11,q:0x1]
[30]: ID(0:01:0); Read Retries Exhausted
[31]:
[32]: ID(0:01:0); Error Event [command:0x28]
[33]: ID(0:01:0); Medium Error [k:0x3,c:0x11,q:0x1]
[34]: ID(0:01:0); Read Retries Exhausted
[35]:
[36]: ID(0:01:0) Cmd[0x28] Fail: Block Range 251520 : 251647 at 4
[37]: 76150 sec
[38]: Medum error - 0x3d680
[39]: ID(0:01:0) Medium Error, LBN Range 251520:251647
[40]: ID(0:01:0) Starting BBR sequence
[41]: ID(0:01:0); Error Event [command:0x28]
[42]: ID(0:01:0); Medium Error [k:0x3,c:0x11,q:0x1]
[43]: ID(0:01:0); Read Retries Exhausted
[44]:
[45]: ID(0:01:0) Cmd[0x28] Medium Error, no BBR actions possible
[46]: ID(0:01:0) Cmd[0x28] Fail: Block Range 251569 : 251569 at 4
[47]: 76162 sec
[48]:   [DC_BBR] Error verified at LBN 251569 - replacing
[49]: ID(0:01:0) Cmd[0x28] Medium Error, no BBR actions possible
[50]: ID(0:01:0) Cmd[0x28] Fail: Block Range 251629 : 251629 at 4
[51]: 76170 sec
[52]:   [DC_BBR] Error verified at LBN 251629 - replacing
[53]: ID(0:01:0) Ending BBR sequence
[54]: >>>Processed 1 BBR entries this thread activation
[55]: ID(0:01:0) Cmd[0x28] Medium Error, no BBR actions possible
[56]: ID(0:01:0) Cmd[0x28] Fail: Block Range 251520 : 251647 at 4
[57]: 76178 sec
[58]: BBR - state 1 error - Medum error - 0x3d680
[59]: BBR failed on slave, reading from master - 0x3d680
[60]: reading from master half 0
[61]: Mirror Container 0 Drive 0:1:0 Failure
[62]: CT_SetAge: sn 0x382c21d2, age 479
[63]: CT_LogMissingEntry: Log missing entry, container 0, dev 1,
[64]: signature 0x6309e7e1, nvEntry 190
[65]: CtMarkDead: container 0, deadEntry 1, dev 1, signature 0x63
[66]: 09e7e1
[67]: CtMarkDead: container 0, deadEntry 1, dev 1, signature 0x63
[68]: 09e7e1
[69]: CT_RemoveDeadPartition: container 0, slice 1
[70]: CT_RemoveDeadPartition: container 0, slice 1, partition 2
[71]: CT_ClearContainerPartition: container 0, driveno 1
[72]: CT_ClearContainerPartition: container 0, driveno 1, entry 0
[73]: Call ClearFailoverSlice: 1
[74]: ClearFailoverSlice: return status: 82
[75]: CT_SetAge: sn 0x382c21d2, age 481
[76]: CT_SetAge: sn 0x382c21d2, age 483
[77]: call GenSingleMirror: container = 0, failover_slice = 1
[78]: CT_SetAge: sn 0x382c21d2, age 485
[79]: set unused nvram to false
[80]: CT_SetAge: sn 0x382c21d2, age 486
[81]: CT_GetNVUid: Found uid 3af801c6, container 0 entry 1
[82]: CT_GetNVUid: Found uid 1c2401c6, container 1 entry 2
[83]: CT_UpdateNVUid: Update container 0, entry 1, Uid 0x3af801c6
[84]: CT_UpdateNVUid: Update container 1, entry 2, Uid 0x1c2401c6
[85]: CT_ClearMissingEntry: Clear missing entry, container 0
[86]: CT_SetAge: sn 0x382c21d2, age 488
[87]: UpdateDiskLogIndex - Set   - container 0, index 0
[88]: GetDiskLogEntry: container - 0, entry return 0
[89]: CT_Create_Log_Task: container 0
[90]: CT_Create_Log_Task: container 0 done, status 0
[91]: Container 0 started REBUILD task on drive 0:1:0
[92]: Starting Mirror:0 scrub
[93]: Master disk: 0, start sector: 128, sector count = 71091456
[94]: Slave  disk: 1, start sector: 128, sector count = 71091456
[95]: Mirror Scrub Container:0   ErrorsFound:0
[96]: Clear disk log: sector - 80, driveno 0
[97]: Clear disk log: sector - 80, driveno 1
[98]: Container 0 completed REBUILD task:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20080903/bc9c206d/attachment.htm 


More information about the Linux-PowerEdge mailing list