mpt-status on LSI SAS 1068, was: RE: humbled by the SC440 and raidmonitoring

Eric Wood eric at interplas.com
Mon Jun 2 14:22:19 CDT 2008


From: "Bryan Mclellan" <bryanm at widemile.com>
> Mpt-status works on my Poweredge 1955 running debian etch. Make sure you 
> have the mptctl module loaded.
>
> # mpt-status
> ioc0 vol_id 0 type IM, 2 phy, 67 GB, state OPTIMAL, flags ENABLED
> ioc0 phy 1 scsi_id 32 FUJITSU  MAY2073RC        D108, 68 GB, state ONLINE, 
> flags NONE
> ioc0 phy 0 scsi_id 1 FUJITSU  MAY2073RC        D108, 68 GB, state ONLINE, 
> flags NONE


Ah, thank you!

# ./mpt-status
ioc0 vol_id 0 type IM, 2 phy, 135 GB, state OPTIMAL, flags ENABLED
ioc0 phy 1 scsi_id 32 SEAGATE  ST3146755SS      T107, 136 GB, state ONLINE, 
flags NONE
ioc0 phy 0 scsi_id 1 SEAGATE  ST3146755SS      T107, 136 GB, state ONLINE, 
flags NONE

With mptctl module loaded, I still couldn't get the gui Dell SAS Raid 
Storage Manager to work.  You wouldn't have that thing working too would 
you?

-eric 



More information about the Linux-PowerEdge mailing list