PowerVault MD1000

Greg Dickie greg at max-t.com
Thu Jan 25 19:36:59 CST 2007


Hello Uche,

  I assume you have this connected to a PERC5e card. You need to
configure the disks on the PERC5 before you can mount it. You should see
traces of both in /proc/scsi/scsi.

You can also examine the configuration using OMSA.

Hope this helps,
Greg

On Thu, 2007-01-25 at 19:42 -0500, Uche Enwesi wrote:
> how do I mount a powerVault MD1000 in Linux RH 4?  How do I check to see if the device was found?
> 
> thanks
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
-- 
Greg Dickie
just a guy
Maximum Throughput



More information about the Linux-PowerEdge mailing list