Openipmi with Opensuse 10.1 Remastered | More information

Postmaster postmaster at novovia.com
Thu Jan 25 12:11:23 CST 2007


I was trying with /etc/rc.d/ipmi start with the same result

Jan 25 19:09:38 dev2 kernel: ipmi message handler version 38.2
Jan 25 19:09:38 dev2 kernel: IPMI System Interface driver.
Jan 25 19:09:38 dev2 kernel: ipmi_si: Found SMBIOS-specified state
machine at I/O address 0xca8, slave address 0x20
Jan 25 19:09:38 dev2 kernel:  Could not set up I/O space
Jan 25 19:09:38 dev2 kernel: Trying to free nonexistent resource
<00000ca8-00000cac>
Jan 25 19:09:38 dev2 kernel: ipmi_si: Unable to find any System Interface(s)



John_Hull at Dell.com a écrit :
> Start the ipmi service on SUSE with `rcipmi start`. That should load all of the necessary IPMI modules for talking to the BMC
>
>
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com on behalf of Postmaster
> Sent: Thu 1/25/2007 11:39 AM
> To: linux-poweredge-Lists
> Subject: Openipmi with Opensuse 10.1 Remastered | More information
>  
> Thanks to Soren Petersen, lsmod indicate that ipmi module is not loaded
>
> When I try to manualy launch it the following error is happening :
>
> It seems that the driver failed to be launch :
>
> Jan 25 18:11:53 dev2 kernel: st: Version 20050830, fixed bufsize 32768,
> s/g segs 256
> Jan 25 18:19:20 dev2 kernel: ipmi message handler version 38.2
> Jan 25 18:19:20 dev2 kernel: IPMI System Interface driver.
> Jan 25 18:19:20 dev2 kernel: ipmi_si: Found SMBIOS-specified state
> machine at I/O address 0xca8, slave address 0x20
> Jan 25 18:19:20 dev2 kernel:  Could not set up I/O space
> Jan 25 18:19:21 dev2 kernel: Trying to free nonexistent resource
> <00000ca8-00000cac>
> Jan 25 18:19:21 dev2 kernel: ipmi_si: Unable to find any System Interface(s)
>
> We don't have an ipmi.init script with the rpm for opensuse
>
>
> Regards,
>
>
> Postmaster a écrit :
>   
>> Hi,
>>
>> We received this week our new poweredge server.
>>
>> We are trying to setup ipmitool on our Dell Poweredge 860. We use YaST
>> to install openipmi 1.4.26 and ipmitool 1.8.6.
>>
>> When we try to launch for exemple : ipmitool chassis status
>> The following error :
>>
>> Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No
>> such file or directory
>> Error sending Chassis Status command
>>
>> Any help will be welcome,
>>
>> Thanks
>>
>> Best regards,
>>
>> Novovia
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
>> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>> Please read the FAQ at http://lists.us.dell.com/faq
>>   
>>     
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>   



More information about the Linux-PowerEdge mailing list