QLE2460 RHEL 4 u4

Victor Hugo dos Santos listas.vhs at gmail.com
Tue Jan 23 08:15:11 CST 2007


2007/1/23, Mick_Ginty at dell.com <Mick_Ginty at dell.com>:
>
>
>
>
> Has anyone experienced problems SAN-attaching a PE6850 with QLE2460 4 GB
> HBAs.
>
> Kernel is RHEL 4.0 u4 (2.6.9-42.Elsmp) AS i386 with a native kernel driver
> 8.01.02-d4 and while a manual mount works fine once either the pseudo or raw
> device is entered on fstab the system halts on boot with fsck error
> messages:
>
>
> The superblock could not be read or does not describe a correct ext2
> filesystem. If the device is valid and it really contains ab ext2 filesystem
> (and not swap or ufs or something else), then the superblock is corrupt, and
> you might try running e2fsck with an alternate superblock.
>
> E2fsck -b 8193 <device>.
>
> I think the problem lies in the boot order of the Qlogic module, in that it
> loads too late. Any suggestions warmly welcome.

mmm... send you content of /etc/fstab and "fdisk -l" command.

bye

-- 
-- 
Victor Hugo dos Santos
Linux Counter #224399



More information about the Linux-PowerEdge mailing list