"command response could not be provided"

Krishnaprasad_K at Dell.com Krishnaprasad_K at Dell.com
Tue Jan 2 23:43:40 CST 2007


U can check the BMC firmware version in www.support.dell.com

Also if openmanage software is installed in ur machine ( 1750 ) u can
check the CPU temp. by executing 
omreport chassis temps command.
 



-----Original Message-----
From: Rob Munsch [mailto:rmunsch at solutionsforprogress.com] 
Sent: Wednesday, January 03, 2007 3:20 AM
To: K, Krishnaprasad
Cc: linux-poweredge-Lists
Subject: Re: "command response could not be provided"

Krishnaprasad_K at Dell.com wrote:
>  
> 
> Are you using the correct BMC firmware version available .

I'm using whatever firmware it came with when it was bought direct from
Dell.  I haven't changed it.  Could it need an upgrade?

> 
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com 
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Rob Munsch
> Sent: Friday, December 29, 2006 10:54 PM
> To: linux-poweredge-Lists
> Subject: "command response could not be provided"
> 
> I've gotten the IPMI drivers, ipmitool, and assorted other goodies all

> working on a Poweredge 1750, but half the sensors come up with (very
> verbose) errors, thusly:
> 
> -----
> ~# ipmitool sdr
> Basebrd Mgt Ctlr | Static MC @ 20h   | ok
> Error reading sensor CPU 1 (#01): Command response could not be 
> provided Error reading sensor CPU 2 (#02): Command response could not 
> be provided Error reading sensor CPU 3 (#03): Command response could 
> not be provided Error reading sensor CPU 4 (#04): Command response
could not be provided
> CPU Planar       | 32 degrees C      | ok
> Ambient          | 19 degrees C      | ok
> CPU              | 1.51 Volts        | ok
> -----
> 
> Is this a problem with the BMC itself, does it mean those sensors 
> aren't present, did i not do this right, all three, or something
else..?
> 
> --
> Rob Munsch
> Solutions For Progress IT
> www.solutionsforprogress.com
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq


--
Rob Munsch
Solutions For Progress IT
www.solutionsforprogress.com



More information about the Linux-PowerEdge mailing list