Degraded controller but disks are ok ?

Irwan Hadi ihblist at gmail.com
Mon Apr 24 21:53:36 CDT 2006


Check the battery status of the controller whether it is OK or not.

On 4/24/06, Ricardo M. Stella <stella at rider.edu> wrote:
>
> Using OMSA 4.5 on a PE2650 (RHEL3 AS)
>
> Omreport shows the controller is degraded but the status of adisk and
> vdisk is ok.  I do know the firmware should be upgraded but can't run the
> updated firmware unless the state is ok.
>
> Any advice ? TIA...
>
> # omreport storage controller
>  Controller  PERC 3/Di (Embedded)
>
> Controllers
> ID                                : 0
> Status                            : Non-Critical
> Name                              : PERC 3/Di
> Slot ID                           : Embedded
> State                             : Degraded
> Firmware Version                  : 2.8-0 (Bld 6082)
> Driver Version                    : Not Applicable
> Minimum Required Firmware Version : 2.8-0 (Bld 6092)
> Minimum Required Driver Version   : Not Applicable
> Number of Channels                : 2
> Rebuild Rate                      : Not Applicable
> Alarm State                       : Not Applicable
> Cluster Mode                      : Not Applicable
> SCSI Initiator ID                 : Not Applicable
>
> # omreport storage adisk controller=0
> List of Array/Hard Disks on Controller PERC 3/Di (Embedded)
>
> Controller PERC 3/Di (Embedded)
> ID                        : 0:0
> Status                    : Ok
> Name                      : Array Disk 0:0
> State                     : Online
> Progress                  : Not Applicable
> Capacity                  : 136.72 GB (146798804992 bytes)
> Used RAID Disk Space      : 136.72 GB (146798804992 bytes)
> Available RAID Disk Space : 0.00 GB (0 bytes)
> Hot Spare                 : No
> Product ID                : IC35L146UCDY10-0
> Revision                  : S27F
> Vendor ID                 : IBM
>
> ID                        : 0:1
> Status                    : Ok
> Name                      : Array Disk 0:1
> State                     : Online
> Progress                  : Not Applicable
> Capacity                  : 136.72 GB (146798804992 bytes)
> Used RAID Disk Space      : 136.72 GB (146798804992 bytes)
> Available RAID Disk Space : 0.00 GB (0 bytes)
> Hot Spare                 : No
> Product ID                : IC35L146UCDY10-0
> Revision                  : S27F
> Vendor ID                 : IBM
>
> # omreport storage vdisk
> List of Virtual Disks in the System
>
> Controller PERC 3/Di (Embedded)
> ID           : 0
> Status       : Ok
> Name         :
> State        : Ready
> Progress     : Not Applicable
> Layout       : RAID-1
> Size         : 136.72 GB (146798936064 bytes)
> Device Name  : /dev/sda
> Read Policy  : Read Cache Enabled
> Write Policy : Write Cache Enabled Protected
> Cache Policy : Not Applicable
> Stripe Size  : Not Applicable
>
>
> --
> °(((=((===°°°(((===========================================
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>



More information about the Linux-PowerEdge mailing list