Graphics via the RAC?

McEwan, Ryan RMcEwan at netopia.com
Fri Mar 18 13:34:36 CST 2005


Not to hijack this thread, but I am doing drac on some 1850's and
2850's, but as soon as the machine boots all the way up, I lose sync,
thus everything via drac.  I'm running SLES 9 and Suse 9.2.  Any
suggestions would be appreciated.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Brian D. McGrew
Sent: Friday, March 18, 2005 12:26 PM
To: Mark Plaksin; linux-poweredge at dell.com
Subject: RE: Graphics via the RAC?

I do it all the time.  Give the RAC an IP and point your web browser at
it and then goto Console login.

-brian
 
Brian D. McGrew { brian at visionpro.com || brian at doubledimension.com }
---
> YOU!  Off my planet!

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Mark Plaksin
Sent: Friday, March 18, 2005 11:19 AM
To: linux-poweredge at dell.com
Subject: Graphics via the RAC?

Is there a way to get graphics and mouse via the RAC on a 2650?  Various
documents make it sound like it's possible but I don't understand how.

I'd like to be able to, for example, boot and control Windows from the
RAC.
Or be able to handle a Linux installer which switches to graphics mode.

Thanks!

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq




More information about the Linux-PowerEdge mailing list