Help fedora 3 - PERC 4e/Di

Andres Guerrero anguerrco at
Mon Mar 14 16:02:40 CST 2005

I installed Fedora Core 3 on a Dell Poweredge 2800.  The Dell has a 'PERC 4e/Di Standard FW 5130' RAID controller card.
The install went well--no problems.  However, after finishing the install and rebooting I get this:
SCSI subsystem initialized
megaraid cmm: (Release Date: Thu Aug 19 09:58:33 EDT 2004)
megaraid: (Release Date: Mon Sep 27 22:15:07 EDT 2004)
megaraid: probe new device 0x1028:0x0013:0x1028:0x016e: bus 2:slot 14:func 0
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 201
megaraid: fw version:[513O] bios version:[H418]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
  Vendor: PE/PV     Model: 1x8 SCSI BP       Rev: 1.0 
  Type:   Processor                          ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
  Vendor: MegaRAID  Model: LD 0 RAID5  139G  Rev: 513O
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 286228480 512-byte hdwr sectors (146549 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
 sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 2, id 0, lun 0

After being working, my Linux server was frozen for unknown reason, any idea. ???
Redhat 3.0 with megaraid2 work fine, but fedora 3 ???

Do You Yahoo!?
Todo lo que quieres saber de Estados Unidos, América Latina y el resto del Mundo.
Visíta Yahoo! Noticias.
-------------- next part --------------
An HTML attachment was scrubbed...

More information about the Linux-PowerEdge mailing list