PE SC1425 SCSI Disks not recognised
ragoley at rdasys.com
Tue Mar 8 10:26:01 CST 2005
Debian should work fine. You will have to do some special installation
step for this server however. Since the support for this one is limited
to the 2.6.10 kernel, you will need to load the 2.6.10 kernel form the
sid repository. The hold up is that I don't know of a installation disk
that has that kernel for you to boot from. There are instructions on
the Debian website for installing from a knoppix livecd that may help
you assuming the knoppix cd has the kernel you need.
On Tue, 2005-03-08 at 10:35, Steve Burrows wrote:
> I have a PE SC1425 with U320 SCSI card & 2 hard drives. I have tried
> Debian Sarge (& Sid) using the 2.6.8 kernel to no avail. Whatever I try
> the installer reports 'no partitionable disks found'.
> I have tried installing with the disks configured as RAID1 (HostRAID)
> and no RAID. The installer clearly recognises the U320 and loads the
> AIC78XX driver but cannot find the disks attached to it.
> Any suggestions? Has anyone succeeded in installing Debian Sarge on a PE
> SC1425 SCSI and if so how? If not, are there any free distributions that
> will work on the 1425 SCSI out of the box? I'm not interested in RedHat
> or SuSE, I have both and am moving away from them.
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> Please read the FAQ at http://lists.us.dell.com/faq
More information about the Linux-PowerEdge