CD still not recognized with kernel 2.6

Gerrit Hannaert gerrit.hannaert at cropdesign.com
Mon Mar 7 07:22:00 CST 2005


Thanks for your feedback, but I was actually posting my log files
because I have NO problems with the CD/DVD unit, despite the errors in
the log file.
I was hoping it would help the previous poster out.

Anyways, there is no DRAC card. I will try your suggestion to get rid of
the error message, but it is not currently a big problem since I can
read CDs/DVDs just fine.
Cheers,

- Gerrit



Joshua_Giles at Dell.com wrote:

>Does this 750 have a DRAC (Dell Remote Access Card) in it perhapts?
>Well, either way this is a strange message:
>"ata: 0x1f0 IDE port busy"
>
>Try passing 'ide2=0x1f0' after a reboot and on the kernel command line
>in grub.  Another suggestion: try removing all the ide cd modules you
>have loaded and 'modprobe' the ide-scsi module.
>
>Read ya,
>
>Joshua Giles
>
>-----Original Message-----
>From: linux-poweredge-admin-Lists On Behalf Of Gerrit Hannaert
>Sent: Wednesday, March 02, 2005 12:15 PM
>To: linux-poweredge-Lists
>Subject: RE: CD still not recognized with kernel 2.6
>
>
>  
>
>>If someone has it working, I guess the output on that machine from 
>>lspci, lsmod, cat /var/log/dmesg and uname -a might help.
>>
>>    
>>
>
>CD/DVD works out of the box on a PE750 with SuSE Linux 9.2:
>
># dmesg|egrep -i 'ide|cd-?rom|scsi|sata|/dev/[hs]c?d[abcd]'
>BIOS-provided physical RAM map:
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Uniform
>Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with
>idebus=xx Probing IDE interface ide0...
>ide1: I/O resource 0x170-0x177 not free.
>ide1: ports already in use, skipping probe Probing IDE interface ide2...
>ide2: Wait for ready failed before probe !
>Probing IDE interface ide3...
>ide3: Wait for ready failed before probe !
>Probing IDE interface ide4...
>ide4: Wait for ready failed before probe !
>Probing IDE interface ide5...
>ide5: Wait for ready failed before probe !
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-floppy driver 0.99.newide
>SCSI subsystem initialized
>ata: 0x1f0 IDE port busy
>ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFEA8 irq 15 scsi0 :
>ata_piix
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) SCSI device
>sda: drive cache: write back Attached scsi disk sda at scsi0, channel 0,
>id 0, lun 0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB) SCSI device
>sdb: drive cache: write back Attached scsi disk sdb at scsi0, channel 0,
>id 1, lun 0
>md: considering sdb3 ...
>md: considering sdb2 ...
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 0
>
># lspci
>0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev
>02) 0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA
>Bridge (rev 02) 0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit
>PCI-X Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 6300ESB
>USB Universal Host Controller (rev 02)
>0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host
>Controller (rev 02)
>0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev
>02)
>0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable
>Interrupt Controller (rev 02)
>0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host
>Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI
>Bridge (rev 0a) 0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC
>Interface Controller (rev 02)
>0000:00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller
>(rev 02)
>0000:00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
>0000:01:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet
>Controller 0000:03:02.0 Ethernet controller: Intel Corp. 82541GI/PI
>Gigabit Ethernet Controller 0000:03:0e.0 VGA compatible controller: ATI
>Technologies Inc Rage XL (rev 27)
>
># lsmod
>Module                  Size  Used by
>raw                    39712  0
>iptable_filter          3072  0
>ip_tables              17664  1 iptable_filter
>ip6table_filter         2816  0
>ip6_tables             18816  1 ip6table_filter
>nls_utf8                2176  0
>udf                    84612  0
>nvram                   8328  0
>speedstep_lib           4228  0
>freq_table              4356  0
>thermal                17928  0
>processor              25640  1 thermal
>fan                     5380  0
>button                  8464  0
>battery                11396  0
>ac                      6404  0
>ipv6                  237312  21
>edd                    10012  0
>joydev                  9664  0
>sg                     35872  0
>st                     37404  0
>sr_mod                 16292  0
>ide_cd                 38176  0
>cdrom                  36508  2 sr_mod,ide_cd
>subfs                   7552  1
>ext3                  115688  1
>jbd                    61348  1 ext3
>e1000                  82308  0
>uhci_hcd               29712  0
>ehci_hcd               29188  0
>intel_mch_agp          10128  0
>agpgart                32168  1 intel_mch_agp
>evdev                   8960  0
>usbcore               106724  4 uhci_hcd,ehci_hcd
>dm_snapshot            17436  0
>dm_mod                 54524  7 dm_snapshot
>raid1                  15872  2
>reiserfs              242000  4
>ata_piix                8836  4
>libata                 41860  1 ata_piix
>sd_mod                 16912  6
>scsi_mod              111052  5 sg,st,sr_mod,libata,sd_mod
>
># uname -a
>Linux linux 2.6.8-24.11-default #1 Fri Jan 14 13:01:26 UTC 2005 i686
>i686 i386 GNU/Linux
>
>
>Hardware monitoring is a different matter. I've had a look at the 
>Systems Management Device Drivers, but they don't seem to be made for
>2.6?
>
>- Gerrit
>
>
>
>
>  
>





More information about the Linux-PowerEdge mailing list