AW: VIRTUALCDROM / VIRTUALFLOPPY on 2850

Matthias Pigulla mp at webfactory.de
Tue Mar 1 15:28:01 CST 2005


That means you cannot have your CD drive ready for use at your colocation site and use the remote management "connect drive" feature from your workstation the same time?

Where can I disable the virtual devices? I did not find any BIOS option that seemed to match.

Best regards,
Matthias

> -----Ursprüngliche Nachricht-----
> Von: Kresimir Sparavec [mailto:kreso at k.plenum.de] 
> Gesendet: Dienstag, 1. März 2005 21:57
> An: Matthias Pigulla
> Cc: linux-poweredge at dell.com; scott at osuosl.org
> Betreff: Re: VIRTUALCDROM / VIRTUALFLOPPY on 2850
> 
> 
> 
> Welcome to the club :)
> 
> The problem is in the SI Linux driver or BIOS or both. You 
> will have to disable the support for it in the kernel and 
> reboot. If you need to install Debian, you will have to:
> 
> a) build your own boot CD (follow the Scott's footsteps),
> b) boot some other OS, copy debian onto raid/disks and 
> install from disk,
> c) boot from USB stick and install from it,
> d) boot from floppies and install.
> 
> I did a) with 2.4.29 stock kernel, SI support disabled, woody 
> install works fine.
> 
> Kresimir




More information about the Linux-PowerEdge mailing list