Dell PE 1650 and aacraid errors

pzero pzero at hotpop.com
Fri May 21 04:26:01 CDT 2004


On 23-04-2004 15:23, pzero wrote:

> Hi,
> I've a Dell PowerEdge 1650 running Red Hat Enterprise Linux 3 ES (Update 
>  1 and all current updates).
> 
> I've noticed a few accraid errors in the log file:
> 
> ---
> # cat /var/log/messages | grep aacraid
> Apr 22 01:10:48 myserver kernel: Red Hat/Adaptec aacraid driver (1.1.2 
> Feb  9 2004 22:51:15)
> Apr 22 01:13:31 myserver kernel: aacraid:ID(0:02:0); Error Event 
> [command:0x28]
> Apr 22 01:13:31 myserver kernel: aacraid:ID(0:02:0); Hardware Error 
> [k:0x4,c:0x2,q:0x80]
> Apr 22 01:13:31 myserver kernel: aacraid:ID(0:02:0); No Seek Complete
> Apr 22 01:13:51 myserver kernel: aacraid:ID(0:02:0) - IO failed, Cmd[0x28]
> Apr 22 01:13:51 myserver kernel: aacraid:Drive 0:2:0 returning error
> Apr 22 01:13:53 myserver kernel: aacraid:RAID5 Container 0 Drive 0:2:0 
> Failure
> Apr 22 01:13:53 myserver kernel: aacraid:RAID5 Failover Container 0 No 
> Failover Assigned
> Apr 22 01:15:06 myserver kernel: aacraid:ID(0:02:0) - Drive spindown failed
> Apr 22 01:15:06 myserver kernel: aacraid:Drive 0:2:0 offline on 
> container 0:
> Apr 22 01:15:49 myserver kernel: aacraid:Container 0 started REBUILD 
> task on drive 0:2:0
> Apr 22 02:10:38 myserver kernel: aacraid:Battery charge is now OK
> Apr 22 03:26:58 myserver kernel: aacraid:Container 0 completed REBUILD 
> task:
> ---
> 
> Here is some info about the server and the SCSI config (dmesg):
> 
> ---
> SCSI subsystem driver Revision: 1.00
> Red Hat/Adaptec aacraid driver (1.1.2 Feb  9 2004 22:51:15)
> PCI: Assigned IRQ 3 for device 01:08.1
> PCI: Sharing IRQ 3 with 02:06.0
> PCI: Found IRQ 3 for device 01:08.1
> PCI: Sharing IRQ 3 with 02:06.0
> AAC0: kernel 2.7.4 build 3153
> AAC0: monitor 2.7.4 build 3153
> AAC0: bios 2.7.0 build 3153
> AAC0: serial 733421d3fafaf001
> PCI: Found IRQ 3 for device 01:08.1
> PCI: Sharing IRQ 3 with 02:06.0
> scsi0 : percraid
> Starting timer : 0 0
> blk: queue c5f29c14, I/O limit 4095Mb (mask 0xffffffff)
>   Vendor: DELL      Model: PERCRAID RAID5    Rev: V1.0
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Starting timer : 0 0
> blk: queue c5f29e14, I/O limit 4095Mb (mask 0xffffffff)
> Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sda: 71089152 512-byte hdwr sectors (36398 MB)
> sda: Write Protect is off
> Partition check:
>  sda: sda1 sda2 sda3
> Journalled Block Device driver loaded
> spurious 8259A interrupt: IRQ7.
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> ---
> 
> I don't know what the aacraid errors mean. Any idea?
> 
> Should I worry about them?
> How can I avoid them?

Hi,
can these errors be related the common PERC3/Di problem discussed on the 
list?

What Linux versions does that problem affect?

Thanks.




More information about the Linux-PowerEdge mailing list