OMSA snmpwalk Debian

Jim McLaughlin jim at stonewatercontrols.com
Wed May 12 06:48:01 CDT 2004


You need to change the mapping of the community name to security name.
The default mapping in debian allows access only to the system subtree.
I think you can just comment out "com2sec paranoid  default  public" and
uncomment "com2sec readonly  default public" to get snmpwalk to show the
dell mib. But you should change the community names and restrict
security permissions before you deploy.

On Wed, 2004-05-12 at 05:43, David ROBERT wrote:
> Hello,
> 
> Dell PE 6300 / PERC2DC
> Linux Debian/Woody
> Kernel : kernel-image-2.4.26-1-686-smp (2.4.26-1.backports.org.1)
> 
> I've installed dellomsa-drivers_4.120-3925_i386.deb
> and dellomsa_4.120-3925_i386.deb SUCCESSFULLY !
> 
> But I can't walk the Dell mib :
> -------------------------------
> 
> blop:~# snmpwalk localhost public .1.3.6.1.4.1.674.10892.1
> End of MIB
> 
> Note that I did reboot the server has suggested in this
> mailing list.
> 
> I did't modify anything in the snmpd.conf file (smuxpeer
> line added my omsa installation).
> 
> 
> Any help would be very appreciated !
> 
> David ROBERT.
> 
> 
> You can have a look at my configuration :
> 
> Some of my processes :
> ======================
> 
>   4200 ?        DW     0:00 [esm_wd_thread]
>   4328 ?        S      0:01 /usr/sbin/dcstor32d
>   4329 ?        S      0:00  \_ /usr/sbin/dcstor32d
>   4330 ?        S      0:00      \_ /usr/sbin/dcstor32d
>   4331 ?        S      0:00      \_ /usr/sbin/dcstor32d
>   4332 ?        S      0:00      \_ /usr/sbin/dcstor32d
>   4333 ?        S      0:00      \_ /usr/sbin/dcstor32d
>   4336 ?        S      0:00 /usr/sbin/dcevt32d
>   4337 ?        S      0:00  \_ /usr/sbin/dcevt32d
>   4338 ?        S      0:00      \_ /usr/sbin/dcevt32d
>   4341 ?        S      0:00 /usr/sbin/dcsnmp32d
>   4343 ?        S      0:00  \_ /usr/sbin/dcsnmp32d
>   4344 ?        S      0:00      \_ /usr/sbin/dcsnmp32d
>   4345 ?        S      0:00      \_ /usr/sbin/dcsnmp32d
>    399 ?        D      0:01 /usr/sbin/MegaServ MegaCtrl
>    409 ?        S      0:00 /usr/sbin/snmpd -s -l /dev/null
>    411 ?        S      0:00 /usr/sbin/snmptrapd -s
> 
> lsmod
> =====
> 
> Module                  Size  Used by    Tainted: P
> esm                    62932   1
> 
> SMUX connection :
> =================
> 
> tcp        0      0 127.0.0.1:199           127.0.0.1:32770 
> ESTABLISHED 409/snmpd
> tcp        0      0 127.0.0.1:32770         127.0.0.1:199 
> ESTABLISHED 4341/dcsnmp32d
> 
> snmpd log :
> ===========
> 
> May 12 12:33:29 geek ucd-snmp[409]: [smux_accept] accepted fd 4 from 
> 127.0.0.1:32770
> May 12 12:33:29 geek ucd-snmp[409]: accepted smux peer: oid 
> enterprises.674.10892.1, password , descr Server Administrator
> May 12 12:33:31 geek ucd-snmp[409]: Connection from 127.0.0.1
> 
> At the end of  /etc/snmp/snmpd.conf
> ===================================
> 
> # Allow Server Administrator to connect to ucd-snmp using SMUX
> smuxpeer .1.3.6.1.4.1.674.10892.1
> 
> Which snmpd :
> =============
> ii  libsnmp-base   4.2.3-2
> ii  libsnmp4.2     4.2.3-2
> ii  snmp           4.2.3-2
> ii  snmpd          4.2.3-2
-- 
/**
 * Jim McLaughlin
 * Senior Software Engineer
 * Stonewater Control Systems
 * 847.864.1060 x107
 * jim at stonewatercontrols.com
 * http://www.stonewatercontrols.com
 */




More information about the Linux-PowerEdge mailing list