PERC3/Di failure workaround hypothesis

McDaniel, Christopher CMcDaniel at aarp.org
Mon May 3 15:41:00 CDT 2004


We noticed, and tried the PERC3/Di workaround hypothesis on one of our 2650's. It had complained with the aacraid:ID(0:01:0); RAM Failure in /var/log/messages in the past. 

After unplugging the ROMB for the PERC controller the systems monitor light turned yellow, and the complained of an intrusion. There may be a way to turn of this alert on the sys monitor, but I don't know how to do it. We decided we did not want to leave our system in a error alert state like this so plugged it back in.

Does this seem like the right thing to do? I think we actually also need the battery in the case of power failure. Am I missing a step? Is there any other info I need to know, or has any progress been made on the solution?

Thanks.

Chris
 

-----Original Message-----
From: linux-poweredge-admin at dell.com [mailto:linux-poweredge-admin at dell.com] On Behalf Of linux-poweredge-request at dell.com
Sent: Tuesday, April 27, 2004 4:01 AM
To: linux-poweredge at dell.com
Subject: Linux-PowerEdge digest, Vol 3 #249 - 15 msgs


Send Linux-PowerEdge mailing list submissions to
	linux-poweredge at dell.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.us.dell.com/mailman/listinfo/linux-poweredge
or, via email, send a message with subject or body 'help' to
	linux-poweredge-request at dell.com

You can reach the person managing the list at
	linux-poweredge-admin at dell.com

When replying, please edit your Subject line so it is more specific than "Re: Contents of Linux-PowerEdge digest..."


Today's Topics:

   1. RE: No PERC4 for PowerEdge 2650? (Sellek, Greg)
   2. Linux-PowerEdge FAQ back online (Matt Domsch)
   3. server crashing with no output (anywhere). Please help (Nielsen, Steve)
   4. Re: PERC4-DC RAID 10 as RAID Level 1-Concatenated? (James Thornton)
   5. 2+3 Split Backplane, RAID 10, 4 Disks and 1 Hot Spare? (James Thornton)
   6. PERC3/Di failure workaround hypothesis (Matt Domsch)
   7. Re: 2+3 Split Backplane, RAID 10, 4 Disks and 1 Hot Spare? (Chris Hoover)
   8. Re: 2+3 Split Backplane, RAID 10, 4 Disks and 1 Hot Spare? (Matt Domsch)
   9. Re: Raid controller on PowerEdge 1300 and Debian Linux (Matt Domsch)
  10. Poweredge 2650 IDE && 5v (Peter Mueller)
  11. RE: get hard drive type (Mark_Relihan at Dell.com)
  12. Your Web Detective Email Reply (webdetective at web-detective.com)
  13. OpenManage and bootable OS on a CD (Paul)
  14. kernel 2.6 with debian/sarge on Poweredge 1750 (Jean-Marc Hoeltzli)
  15. Re: ERA/O 1750 & console (=?ISO-8859-1?Q?Taneli_Lepp=E4?=)

--__--__--

Message: 1
Subject: RE: No PERC4 for PowerEdge 2650?
Date: Mon, 26 Apr 2004 11:10:36 -0500
From: "Sellek, Greg" <GSellek at NameProtect.com>
To: <linux-poweredge at dell.com>

Short of ordering a Perc4 for every 2650 that I want to upgrade to RH ES, is there anything else I can do to get around the Perc3/Di problem?

Thanks,
Greg


-----Original Message-----
From: Matt Domsch [mailto:Matt_Domsch at dell.com] 
Sent: Monday, April 26, 2004 10:37 AM
To: Andrew Mann
Cc: Kevin Merritt; linux-poweredge at dell.com
Subject: Re: No PERC4 for PowerEdge 2650?


On Mon, Apr 26, 2004 at 01:02:20AM -0400, Andrew Mann wrote:
>    I don't know if the claim is accurate or not, but during a
> conversation late last week with Dell tech support here in the US I
was 
> informed that you can no longer order a 2650 with an Adaptec based
raid 
> controller. The integrated raid controller on 2650s ordered "recently"

> is supposedly an LSI controller now.

No, this is *not* accurate.  The PE2650 still comes with the PERC3/Di
(Adaptec-based) ROMB, same as it has from the beginning.

You can order PERC4 add-in cards, which are LSI-based.

Thanks,
Matt

-- 
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com


--__--__--

Message: 2
Date: Mon, 26 Apr 2004 11:24:50 -0500
From: Matt Domsch <Matt_Domsch at dell.com>
To: linux-poweredge at dell.com
Subject: Linux-PowerEdge FAQ back online

The Linux-PowerEdge FAQ is back online after a long hiatus.  It's available at http://lists.us.dell.com/faq

If you'd like to provide content, please post it to the list, and note in the subject [FAQ][PATCH] or similar.

Thanks,
Matt

-- 
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com


--__--__--

Message: 3
Subject: server crashing with no output (anywhere). Please help
Date: Mon, 26 Apr 2004 13:50:14 -0400
From: "Nielsen, Steve" <SNielsen at comscore.com>
To: <linux-poweredge at dell.com>

Hi,

My linux server is crashing and I don't know why. It does not print anything to the console or anything to syslog. Is there a way to get it to generate some type of log as to why its crashing?

I am running redhat 7.3 (updated vis fedora legacy project) on a dell 2450 (2 cpus, 4 scsi disks, 1 gb ram...)

Thanks!
Steve


--__--__--

Message: 4
Date: Mon, 26 Apr 2004 13:00:49 -0500
From: James Thornton <james at jamesthornton.com>
To: linux-poweredge at dell.com
Subject: Re: PERC4-DC RAID 10 as RAID Level 1-Concatenated?

 > On "PERC Subsystem Controllers"
 > (http://docs.us.dell.com/docs/software/smarrman/marb32/ch8_perc.htm)
 > it  says that the PERC 3/SC, 3/DCL, 3/DC, 3/QC, 4/Di RAID 10 support  > is RAID Level 1-Concatenated. Is this the case for PERC4-DC? Where is  > this documented?

Marc Elliot from Dell sales said that PERC4-DC does support RAID 10 
proper, but he didn't know where this is documented online. Has anyone 
found where this is documented?

Thanks.
-- 

  James Thornton
_____________________________________________
Internet Consultant, http://jamesthornton.com



--__--__--

Message: 5
Date: Mon, 26 Apr 2004 13:51:56 -0500
From: James Thornton <james at jamesthornton.com>
To: linux-poweredge at dell.com
Subject: 2+3 Split Backplane, RAID 10, 4 Disks and 1 Hot Spare?

I am considering purchasing a Dell 2650 with five 73 GB SCSI 320 HDDs. 
The server will run a Web database application, and I want to configure 
it as RAID 10 with four disks, having one hot spare.

The server will have a PERC4-DC RAID controller, and it has an option 
for a 5 Bay (2+3) hot plug SCSI hard drive split backplane. From what I 
understand, you connect one channel to each side of the split so you get 
double the bandwidth (320 MB per channel). I have never set up RAID 10 
before, but as I understand it, channels are transparent to the array so 
using a split backplane with a four disk RAID 10 configuration should be 
fine. Is this correct? Will the hot spare be available to both channels 
in the event of a disk crash?

Thanks.



--__--__--

Message: 6
Date: Mon, 26 Apr 2004 14:15:02 -0500
From: Matt Domsch <Matt_Domsch at dell.com>
To: linux-poweredge at dell.com
Subject: PERC3/Di failure workaround hypothesis


--uXxzq0nDebZQVNAZ
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Mon, Apr 26, 2004 at 11:10:36AM -0500, Sellek, Greg wrote:
> Short of ordering a Perc4 for every 2650 that I want to upgrade to RH 
> ES, is there anything else I can do to get around the Perc3/Di 
> problem?

Our working hypothesis for a workaround is to do as follows:

In afacli, set:

Read Cache: enabled
Write Cache: enabled when protected

Then unplug the ROMB battery.  A reboot is not necessary.  The firmware will immediately drop into Write-Through Cache mode, which in our testing has not exhibited the problem.  Setting the write cache to disabled in afacli doesn't seem to help - you've got to unplug the battery with it in the above settings.=20

We are continuing to search for the root cause to the problem, and will update the list when we can.

Thanks,
Matt

--=20
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

--uXxzq0nDebZQVNAZ
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQFAjV+2Iavu95Lw/AkRAnzAAJ4rKB9BvqnSnVemUQA9DdrjLx217QCfeiJ8
a/Pr546kW7uP+iDa+NNxIEk=
=Vfyi
-----END PGP SIGNATURE-----

--uXxzq0nDebZQVNAZ--


--__--__--

Message: 7
From: "Chris Hoover" <revoohc at sermonaudio.com>
To: <linux-poweredge at dell.com>
Subject: Re: 2+3 Split Backplane, RAID 10, 4 Disks and 1 Hot Spare?
Date: Mon, 26 Apr 2004 16:27:25 -0400

In a 2+3 setup, the 2 side can not see the hot spare on the 3 side.  So, you 
would have a hot spare on the 3 side (if you can do this with the controller 
- have not tried), but would have to hot swap it to fix the 2 side.

chris
On Monday 26 April 2004 14:51, James Thornton wrote:
> I am considering purchasing a Dell 2650 with five 73 GB SCSI 320 HDDs. 
> The server will run a Web database application, and I want to 
> configure it as RAID 10 with four disks, having one hot spare.
>
> The server will have a PERC4-DC RAID controller, and it has an option 
> for a 5 Bay (2+3) hot plug SCSI hard drive split backplane. From what 
> I understand, you connect one channel to each side of the split so you 
> get double the bandwidth (320 MB per channel). I have never set up 
> RAID 10 before, but as I understand it, channels are transparent to 
> the array so using a split backplane with a four disk RAID 10 
> configuration should be fine. Is this correct? Will the hot spare be 
> available to both channels in the event of a disk crash?
>
> Thanks.
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com 
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search the list 
> archives at http://lists.us.dell.com/htdig/



--__--__--

Message: 8
Date: Mon, 26 Apr 2004 15:57:24 -0500
From: Matt Domsch <Matt_Domsch at dell.com>
To: Chris Hoover <revoohc at sermonaudio.com>
Cc: linux-poweredge at dell.com
Subject: Re: 2+3 Split Backplane, RAID 10, 4 Disks and 1 Hot Spare?


--OaZoDhBhXzo6bW1J
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Mon, Apr 26, 2004 at 04:27:25PM -0400, Chris Hoover wrote:
> In a 2+3 setup, the 2 side can not see the hot spare on the 3 side.  
> So, =
you=20
> would have a hot spare on the 3 side (if you can do this with the 
> control=
ler=20
> - have not tried), but would have to hot swap it to fix the 2 side.

Hot spares are per-controller, not per channel.  So it's fine to have a hot spare on the 3 side, but if you lose a disk on the 2-side, it'll rebuild onto the spare such that you'll really be running with one channel with one disk plus a bad disk, and the second channel with three disks.  No huge worry.

Thanks,
Matt

--=20
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

--OaZoDhBhXzo6bW1J
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQFAjXe0Iavu95Lw/AkRAq/qAJ9TwmwHT50JvOstVFH7kqSryCaI7ACfeA1k
R+GcDTDjfUL+K71rL/D1XZQ=
=0TVa
-----END PGP SIGNATURE-----

--OaZoDhBhXzo6bW1J--


--__--__--

Message: 9
Date: Mon, 26 Apr 2004 16:08:41 -0500
From: Matt Domsch <Matt_Domsch at dell.com>
To: Magnus Nordlander <magnus at nordlander.tk>
Cc: linux-poweredge at dell.com
Subject: Re: Raid controller on PowerEdge 1300 and Debian Linux


--9l24NVCWtSuIVIod
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Sun, Apr 25, 2004 at 06:22:30PM +0200, Magnus Nordlander wrote:
> I just got myself a PowerEdge 1300, and I'm trying to install Debian  
>Linux on it. The problem is that the raid controller won't work. When i  
>use the sarge netinstall cd, i can't modprobe megaraid, and when i try  
>the install disc from http://oregonstate.edu/~kveton/debian/ it tells 
>me  that it cannot find any hard disks. =20
> Am I not supposed to use the megaraid driver?

You don't specify which RAID controller you've got, but most likely it uses the megaraid driver.

Do you have a logical drive created on the controller already?  If not, please do that via the controller's BIOS tool.

Thanks,
Matt

--=20
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

--9l24NVCWtSuIVIod
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQFAjXpZIavu95Lw/AkRAmuxAJ43ae8fbXvMEsEXRNeu0xdQ7+NW1wCbBxmz
/9+jZt/B5gkn8aHlarPhUPQ=
=j5OL
-----END PGP SIGNATURE-----

--9l24NVCWtSuIVIod--


--__--__--

Message: 10
From: Peter Mueller <pmueller at sidestep.com>
To: linux-poweredge at dell.com
Subject: Poweredge 2650 IDE && 5v
Date: Mon, 26 Apr 2004 14:36:04 -0700

Is there a usable IDE on the new PE-2650's?  I see there is more than what was in the year-ago version.  More importantly, what about the 3 pin area labeled 'IDE' right next to it; is it 5v?  I want to use a solid-state drive
(CF-IDE) and I need power for it.  Last year I used a USB-cable-hack and I'd like to avoid doing it again.

Thanks,

P


--__--__--

Message: 11
Subject: RE: get hard drive type
Date: Mon, 26 Apr 2004 18:51:20 -0500
From: <Mark_Relihan at Dell.com>
To: <tmarshall at tirawireless.com>, <linux-poweredge at Dell.com>

You could also run:
[root]# scsi_info /dev/sda
SCSI_ID="0,0,0"
MODEL="SEAGATE ST336704LC"
FW_REV="0004"

This is a U160 scsi controller and not a raid controller. 


Mark Relihan
Team Lead for Linux Team
Dell Americas Enterprise Services
Linux and Novell Hardware Support

Premier support (Files/Documentation)  http://premiersupport.dell.com/ Dell Linux Community Web: http://linux.dell.com/

Note: This email is not subject to a legally binding commitment

-----Original Message-----
From: linux-poweredge-admin at dell.com [mailto:linux-poweredge-admin at dell.com] On Behalf Of Trevor Marshall
Sent: Tuesday, April 20, 2004 9:19 AM
To: linux-poweredge at dell.com
Subject: RE: get hard drive type

Nice one Peter. Was sure we should be able to get this... Now to get it off the rest of the servers.. thanks! -Trevor

-----Original Message-----
From: Peter Smith [mailto:peter.smith at utsouthwestern.edu]
Sent: Monday, April 19, 2004 8:38 PM
To: linux-poweredge at dell.com
Subject: Re: get hard drive type


Afacli is a cinch:

AFA0> disk list /full
Executing: disk list /full=TRUE

B:ID:L  Device Type     Removable media  Vendor-ID Product-ID        
Rev   Blocks    Bytes/Block Usage            Shared Rate
------  --------------  ---------------  --------- ----------------  
----- --------- ----------- ---------------- ------ ----
0:00:0   Disk            N                SEAGATE   ST336706LC        
8A03  71132959  512         Initialized      NO     160
0:01:0   Disk            N                SEAGATE   ST336706LC        
8A03  71132959  512         Initialized      NO     160
0:03:0   Disk            N                SEAGATE   ST336706LC        
8A03  71132959  512         Initialized      NO     160
0:04:0   Disk            N                SEAGATE   ST336706LC        
8A03  71132959  512         Initialized      NO     160

Peter


Trevor Marshall wrote:

>Yes I was hoping to glean disk model really, just for replacement parts
and the like. Looks like the answer is no. Very strange I'm sure I've pulled disc info off of RH6.2 with an ICP vortex controller. I don't like the idea of bringing the machines down to the bios to get this information so I guess I'll see what I can dig up from Dell using my serial numbers.
>And at least I'm a bit handier with afacli now. thanks Jason, Trevor
>  
>

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/


--__--__--

Message: 12
To: linux-poweredge at dell.com
From: webdetective at web-detective.com
Subject: Your Web Detective Email Reply
Date: Mon, 26 Apr 2004 19:57:29 -0700

IMPORTANT: HOW TO CONTACT WEB DETECTIVE
This Is An Automatic Email Reply From Web Detective

DO NOT use "REPLY TO" to RESPOND to this EMAIL.

We have received your Email. Due to email "problems", spam
and viruses will not be able to respond to you directly at this address. For an immediate response to your needs please follow the directions below.

PROBLEMS ACCESSING MEMBERS AREA?
Send Email to:
myaccess at web-detective.com
Include as much of your signup information as you can.
We'll email right back with your access info.

REFUND REQUESTS?
Email to:
refund at web-detective.com
Please include your ticket number for identification.

TO CONTACT A LIVE PERSON
Email to:
question at web-detective.com
We'll respond ASAP

Thanks,
Administration




--__--__--

Message: 13
From: "Paul" <paul at kbs.net.au>
To: <linux-poweredge at dell.com>
Subject: OpenManage and bootable OS on a CD
Date: Tue, 27 Apr 2004 16:05:28 +1000

Hi Everyone,

Has anyone ever seen or done a bootable OS such as 2000/NT but with an OpenManage install hacked into so you can basically boot from a CD and boot a windows 2000 or NT4 shell (just like sysinternals ERD) and then run OpenManage without running any OS, just booting from the CD. That way you could get access to The raid card, system chassis status, alert logs, event logs, rac control panel etc all from the read only boot cd. Has anyone though of doing this? I think this would be an awesome tool to have around, great if you run os XYZ and just need to look at server logs or raid card admin but your OS doesn't support OpenManage and the associated omsa stuff. Almost like the server assistant, identical but actually has a functional OpenManage on it too.

I might look into making one

I will let you all know how I go :)

Thanks


--__--__--

Message: 14
Date: Tue, 27 Apr 2004 08:51:54 +0200
From: Jean-Marc Hoeltzli <jm.hoeltzli at coelis.com>
To: linux-poweredge at dell.com
Subject: kernel 2.6 with debian/sarge on Poweredge 1750

Hi,

I've installed two poweredge 1750 with the debian Sarge netinst. 
Everithing went ok  until i upgraded the kernel to kernel-image-2.6.3-1-686-smp. (the latest 2.6 in the testing debain branch) whith this kernel the machine crashes sotimes whith such messages: Apr 22 10:20:42 ikki kernel: Unable to handle kernel paging request at 
virtual address 010000a4
Apr 22 10:20:42 ikki kernel:  printing eip:
Apr 22 10:20:42 ikki kernel: c01e5bed
Apr 22 10:20:42 ikki kernel: *pde = 00000000
Apr 22 10:20:42 ikki kernel: Oops: 0000 [#1]
Apr 22 10:20:42 ikki kernel: CPU:    2
Apr 22 10:20:42 ikki kernel: EIP:    0060:[init_dev+29/1392]    Tainted: P
Apr 22 10:20:42 ikki kernel: EFLAGS: 00010246
Apr 22 10:20:42 ikki kernel: EIP is at init_dev+0x1d/0x570
Apr 22 10:20:42 ikki kernel: eax: 6d710000   ebx: f7814840   ecx: 
c02ff81c   edx: 00000000
Apr 22 10:20:42 ikki kernel: esi: 01000000   edi: f7814840   ebp: 
6d710000   esp: de4d3e98
Apr 22 10:20:42 ikki kernel: ds: 007b   es: 007b   ss: 0068
Apr 22 10:20:42 ikki kernel: Process bash (pid: 2767, 
threadinfo=de4d2000 task=e6070080)
Apr 22 10:20:42 ikki kernel: Stack: 6d710000 f763d8e0 f16ff005 00000003 
f16ff005 de4d3f70 00000000 00000000
Apr 22 10:20:42 ikki kernel:        f7625f00 c03331e0 c017bbb1 f7625f00 
c0135f25 00000005 f88eb084 00000005
Apr 22 10:20:42 ikki kernel:        f7814840 01000000 f7814840 00500000 
c01e6aa8 01000000 6d710000 de4d3f00
Apr 22 10:20:42 ikki kernel: Call Trace:
Apr 22 10:20:42 ikki kernel:  [dput+49/624] dput+0x31/0x270
Apr 22 10:20:42 ikki kernel:  [in_group_p+37/48] in_group_p+0x25/0x30 Apr 22 10:20:42 ikki kernel:  [__crc_tcp_close+561374/712409] 
ext3_permission+0xb4/0x1c0 [ext3]
Apr 22 10:20:42 ikki kernel:  [tty_open+152/944] tty_open+0x98/0x3b0 Apr 22 10:20:42 ikki kernel:  [chrdev_open+293/656] chrdev_open+0x125/0x290 Apr 22 10:20:42 ikki kernel:  [get_empty_filp+104/224] 
get_empty_filp+0x68/0xe0
Apr 22 10:20:42 ikki kernel:  [dentry_open+352/560] dentry_open+0x160/0x230 Apr 22 10:20:42 ikki kernel:  [filp_open+104/112] filp_open+0x68/0x70 Apr 22 10:20:42 ikki kernel:  [sys_open+91/144] sys_open+0x5b/0x90 Apr 22 10:20:42 ikki kernel:  [syscall_call+7/11] syscall_call+0x7/0xb Apr 22 10:20:42 ikki kernel: Apr 22 10:20:42 ikki kernel: Code: 8b 86 a4 00 00 00 8b 1c a8 85 db 74 
66 8b 83 a0 00 00 00 a9

as those servers are now 500 km away from my office, remotely upgrading 
the kernel is somewhat risky. So I  would like to know wich 2.6 kernel I 
shoud use safely on these computer.
Any experience report would help me.

Thanks in advance

Jean-Marc Hoeltzli
Coelis


--__--__--

Message: 15
Date: Tue, 27 Apr 2004 11:02:21 +0300
From: =?ISO-8859-1?Q?Taneli_Lepp=E4?= <taneli at crasman.fi>
Organization: Crasman Co
To: Linux-Poweredge at dell.com
Subject: Re: ERA/O 1750 & console

Taneli Leppä wrote:
> 2) The "Console redirect" option brings up a popup, howver the
>    console is black. The system is running Linux without X.
>    Is it supposed to redirect text and video modes?

The Java console has the following errors (I've tried both
JRE 1.5.0b1 and 1.4.0_01):

java.security.cert.CertificateException: Check signer key usage failed 
in certificate
	at com.sun.deploy.security.CertUtils.checkUsageForCodeSigning(Unknown 
Source)
	at com.sun.deploy.security.CertUtils.checkUsageForCodeSigning(Unknown 
Source)
	at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown 
Source)
	at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown 
Source)
	at sun.plugin.security.PluginClassLoader.getPermissions(Unknown Source)
	at java.security.SecureClassLoader.getProtectionDomain(Unknown Source)
	at java.security.SecureClassLoader.defineClass(Unknown Source)
	at java.net.URLClassLoader.defineClass(Unknown Source)
	at java.net.URLClassLoader.access+100(Unknown Source)
	at java.net.URLClassLoader+1.run(Unknown Source)
	at java.security.AccessController.doPrivileged(Native Method)
	at java.net.URLClassLoader.findClass(Unknown Source)
	at sun.applet.AppletClassLoader.findClass(Unknown Source)
	at java.lang.ClassLoader.loadClass(Unknown Source)
	at sun.applet.AppletClassLoader.loadClass(Unknown Source)
	at java.lang.ClassLoader.loadClass(Unknown Source)
	at sun.applet.AppletClassLoader.loadCode(Unknown Source)
	at sun.applet.AppletPanel.createApplet(Unknown Source)
	at sun.plugin.AppletViewer.createApplet(Unknown Source)
	at sun.applet.AppletPanel.runLoader(Unknown Source)
	at sun.applet.AppletPanel.run(Unknown Source)
	at java.lang.Thread.run(Unknown Source) java.lang.NullPointerException
	at DRSCConsoleRedirectFrame.keyPressed(DRSCConsoleRedirectFrame.java:491)
	at java.awt.Component.processKeyEvent(Unknown Source)
	at java.awt.Component.processEvent(Unknown Source)
	at java.awt.Container.processEvent(Unknown Source)
	at java.awt.Window.processEvent(Unknown Source)
	at java.awt.Component.dispatchEventImpl(Unknown Source)
	at java.awt.Container.dispatchEventImpl(Unknown Source)
	at java.awt.Window.dispatchEventImpl(Unknown Source)
	at java.awt.Component.dispatchEvent(Unknown Source)
	at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.pumpApprovedKeyEvents(Unknown 
Source)
	at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
	at java.awt.Component.dispatchEventImpl(Unknown Source)
	at java.awt.Container.dispatchEventImpl(Unknown Source)
	at java.awt.Window.dispatchEventImpl(Unknown Source)
	at java.awt.Component.dispatchEvent(Unknown Source)
	at java.awt.EventQueue.dispatchEvent(Unknown Source)
	at java.awt.SequencedEvent.dispatch(Unknown Source)
	at java.awt.EventQueue.dispatchEvent(Unknown Source)
	at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
	at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
	at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
	at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
	at java.awt.EventDispatchThread.run(Unknown Source) java.lang.NullPointerException
	at DRSCConsoleRedirectFrame.keyPressed(DRSCConsoleRedirectFrame.java:491)
	at java.awt.Component.processKeyEvent(Unknown Source)
	at java.awt.Component.processEvent(Unknown Source)
	at java.awt.Container.processEvent(Unknown Source)
	at java.awt.Window.processEvent(Unknown Source)
	at java.awt.Component.dispatchEventImpl(Unknown Source)
	at java.awt.Container.dispatchEventImpl(Unknown Source)
	at java.awt.Window.dispatchEventImpl(Unknown Source)
	at java.awt.Component.dispatchEvent(Unknown Source)
	at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
	at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
	at java.awt.Component.dispatchEventImpl(Unknown Source)
	at java.awt.Container.dispatchEventImpl(Unknown Source)
	at java.awt.Window.dispatchEventImpl(Unknown Source)
	at java.awt.Component.dispatchEvent(Unknown Source)
	at java.awt.EventQueue.dispatchEvent(Unknown Source)
	at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
	at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
	at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
	at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
	at java.awt.EventDispatchThread.run(Unknown Source)
java.net.URISyntaxException: Expected scheme-specific part at index 5: http:
	at java.net.URI$Parser.fail(Unknown Source)
	at java.net.URI$Parser.failExpecting(Unknown Source)
	at java.net.URI$Parser.parse(Unknown Source)
	at java.net.URI.<init>(Unknown Source)
	at com.sun.deploy.net.proxy.DeployProxySelector.select(Unknown Source)
	at java.net.SocksSocketImpl.connect(Unknown Source)
	at java.net.Socket.connect(Unknown Source)
	at java.net.Socket.connect(Unknown Source)
	at java.net.Socket.<init>(Unknown Source)
	at java.net.Socket.<init>(Unknown Source)
	at DRSCConsoleRedirectText.start(DRSCConsoleRedirectText.java:78)
	at 
DRSCConsoleRedirectFrame.StartConsoleTextRedirect(DRSCConsoleRedirectFrame.java:1107)
	at DRSCConsoleRedirectFrame.run(DRSCConsoleRedirectFrame.java:908)
	at java.lang.Thread.run(Unknown Source)

-- 
   Taneli Leppä         | Crasman Co Ltd
   <taneli at crasman.fi>  | <http://www.crasman.fi/>



--__--__--

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/

End of Linux-PowerEdge Digest




More information about the Linux-PowerEdge mailing list