Problem about PE4600

Jiang Alan whjiang_cn at hotmail.com
Fri Mar 28 23:02:00 CST 2003


I don't know. It is the one in Mandrake 9.1. How can I know the version?

>From: Robert_Padamonsky at Dell.com
>To: whjiang_cn at hotmail.com
>Subject: RE: Problem about PE4600
>Date: Fri, 28 Mar 2003 09:01:41 -0600
>
>What version of aic7xxx driver are you using?  It should be 6.2.8 or 
better.
>
>-----Original Message-----
>From: Jiang Alan [mailto:whjiang_cn at hotmail.com]
>Sent: Thursday, March 27, 2003 11:50 PM
>To: Domsch, Matt
>Cc: Linux-PowerEdge at exchange.dell.com
>Subject: Re: Problem about PE4600
>
>
>
> >From: Matt Domsch <Matt_Domsch at dell.com>
> >To: Jiang Alan <whjiang_cn at hotmail.com>
> >CC: Linux-PowerEdge at dell.com
> >Subject: Re: Problem about PE4600
> >Date: 27 Mar 2003 22:52:23 -0600
> >
> >On Thu, 2003-03-27 at 20:54, Jiang Alan wrote:
> > > I have installed Mandrake 9.1 on my PE4600 because of the failure of
> > > Redhat 8.0 on it. Now I have two questions:
> >
> >What failures with Red Hat Linux 8.0?  That should "just work".  Are
> >your failures already noted in our Red Hat Linux 8.0 Information Update?
> >http://docs.us.dell.com/docs/software/oslin8x/80_update/en/Linux8A01.pdf
> >
> >
> > > 1. After installation, the front LED Panel shows in orange color : 
PCI
> > > Parity. How to solve this error?
> >
> >We've seen this now in our labs, and are trying to track it down.  Can
> >you send me the output of:
> >
> >lspci -vvx
>The result is:
>00:00.0 Host bridge: ServerWorks CMIC-HE (rev 22)
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>00: 66 11 11 00 00 00 00 00 22 00 00 06 10 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.1 Host bridge: ServerWorks CMIC-HE
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>00: 66 11 11 00 00 00 00 00 00 00 00 06 10 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.2 Host bridge: ServerWorks CMIC-HE
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>00: 66 11 11 00 00 00 00 00 00 00 00 06 10 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.3 Host bridge: ServerWorks CMIC-HE
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>00: 66 11 11 00 00 00 00 00 00 00 00 06 10 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
>08)
>	Subsystem: Dell Computer Corporation: Unknown device 0106
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min, 14000ns max), cache line size 08
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at fe203000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at ecc0 [size=64]
>	Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=1M]
>	Capabilities: <available only to root>
>00: 86 80 29 12 17 01 90 02 08 00 00 02 08 20 00 00
>10: 00 30 20 fe c1 ec 00 00 00 00 00 fe 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 06 01
>30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38
>
>00:06.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev
>01)
>	Subsystem: Dell Computer Corporation: Unknown device 0106
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 32 (9750ns min, 6250ns max), cache line size 08
>	Interrupt: pin A routed to IRQ 18
>	BIST result: 00
>	Region 0: I/O ports at e800 [disabled] [size=256]
>	Region 1: Memory at fe202000 (64-bit, non-prefetchable) [size=4K]
>	Expansion ROM at fe100000 [disabled] [size=128K]
>	Capabilities: <available only to root>
>00: 05 90 1f 00 16 01 90 02 01 00 00 01 08 20 00 80
>10: 01 e8 00 00 04 20 20 fe 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 06 01
>30: 00 00 10 fe dc 00 00 00 00 00 00 00 0a 01 27 19
>
>00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
>(prog-if 00 [VGA])
>	Subsystem: Dell Computer Corporation: Unknown device 0106
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
>Stepping+ SERR- FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min), cache line size 08
>	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: I/O ports at e400 [size=256]
>	Region 2: Memory at fe201000 (32-bit, non-prefetchable) [size=4K]
>	Expansion ROM at <unassigned> [disabled] [size=128K]
>	Capabilities: <available only to root>
>00: 02 10 52 47 a7 00 90 02 27 00 00 03 08 20 00 00
>10: 00 00 00 fd 01 e4 00 00 00 10 20 fe 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 06 01
>30: 00 00 00 00 5c 00 00 00 00 00 00 00 ff 00 08 00
>
>00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
>	Subsystem: ServerWorks CSB5 South Bridge
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
>Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort+ >SERR- <PERR-
>	Latency: 32
>00: 66 11 01 02 47 01 00 22 93 00 00 06 00 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 01 02
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 
82
>[Master PriP])
>	Subsystem: ServerWorks CSB5 IDE Controller
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
>Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 64
>	Region 0: I/O ports at <ignored>
>	Region 1: I/O ports at <ignored>
>	Region 2: I/O ports at <ignored>
>	Region 3: I/O ports at <ignored>
>	Region 4: I/O ports at 08b0 [size=16]
>00: 66 11 12 02 45 01 00 02 93 82 01 01 00 40 80 00
>10: c1 08 00 00 c9 08 00 00 d1 08 00 00 d9 08 00 00
>20: b1 08 00 00 00 00 00 00 00 00 00 00 66 11 12 02
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05)
>(prog-if 10 [OHCI])
>	Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
>Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR+
>	Latency: 32 (20000ns max), cache line size 08
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
>00: 66 11 20 02 57 01 80 82 05 10 03 0c 08 20 80 00
>10: 00 00 20 fe 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 20 02
>30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 50
>
>00:0f.3 ISA bridge: ServerWorks GCLE Host Bridge
>	Subsystem: ServerWorks: Unknown device 0230
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 0
>00: 66 11 25 02 05 00 00 02 00 00 01 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 30 02
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:10.0 Host bridge: ServerWorks CIOB30 (rev 03)
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort+ >SERR- <PERR-
>	Capabilities: <available only to root>
>00: 66 11 10 00 42 01 b0 22 03 00 00 06 00 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
>
>00:10.2 Host bridge: ServerWorks CIOB30 (rev 03)
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort+ >SERR- <PERR-
>	Capabilities: <available only to root>
>00: 66 11 10 00 42 01 b0 22 03 00 00 06 00 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
>
>00:11.0 Host bridge: ServerWorks CIOB30 (rev 03)
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort+ >SERR- <PERR-
>	Capabilities: <available only to root>
>00: 66 11 10 00 42 01 b0 22 03 00 00 06 00 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
>
>00:11.2 Host bridge: ServerWorks CIOB30 (rev 03)
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort+ >SERR- <PERR-
>	Capabilities: <available only to root>
>00: 66 11 10 00 42 01 b0 22 03 00 00 06 00 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
>
>01:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5700 
Gigabit
>Ethernet (rev 14)
>	Subsystem: Dell Computer Corporation Broadcom BCM5700
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 32 (16000ns min), cache line size 08
>	Interrupt: pin A routed to IRQ 22
>	Region 0: Memory at fcf00000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: <available only to root>
>00: e4 14 44 16 06 01 b0 02 14 00 00 02 08 20 00 00
>10: 04 00 f0 fc 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 06 01
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 40 00
>
>01:08.0 PCI bridge: Intel Corp.: Unknown device 0309 (rev 01) (prog-if 00
>[Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 32, cache line size 10
>	Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fcd00000-fcefffff
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: <available only to root>
>00: 86 80 09 03 07 01 b0 04 01 00 04 06 10 20 81 00
>10: 00 00 00 00 00 00 00 00 01 02 02 20 d0 d0 a0 22
>20: d0 fc e0 fc f0 ff 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 68 00 00 00 00 00 00 00 00 00 06 00
>
>01:08.1 RAID bus controller: Dell Computer Corporation PowerEdge 
Expandable
>RAID Controller 3 (rev 01)
>	Subsystem: Dell Computer Corporation PowerEdge Expandable RAID
>Controller
>3/Di
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
><TAbort-
><MAbort+ >SERR- <PERR-
>	Latency: 32, cache line size 08
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>	Expansion ROM at fcc00000 [disabled] [size=64K]
>	Capabilities: <available only to root>
>00: 28 10 0a 00 16 01 b0 24 01 00 04 01 08 20 80 00
>10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 06 01
>30: 00 00 c0 fc 80 00 00 00 00 00 00 00 0a 01 00 00
>
>02:06.0 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)
>	Subsystem: Dell Computer Corporation PowerEdge 2550
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 32 (10000ns min, 6250ns max), cache line size 08
>	Interrupt: pin A routed to IRQ 20
>	BIST result: 00
>	Region 0: I/O ports at dc00 [size=256]
>	Region 1: Memory at fcdff000 (64-bit, non-prefetchable) [size=4K]
>	Expansion ROM at fce00000 [disabled] [size=128K]
>	Capabilities: <available only to root>
>00: 05 90 c5 00 17 01 b0 02 01 00 00 01 08 20 80 80
>10: 01 dc 00 00 04 f0 df fc 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 c5 00
>30: 00 00 e0 fc dc 00 00 00 00 00 00 00 0a 01 28 19
>
>02:06.1 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)
>	Subsystem: Dell Computer Corporation PowerEdge 2550
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
>Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
><TAbort-
><MAbort- >SERR- <PERR-
>	Latency: 32 (10000ns min, 6250ns max), cache line size 08
>	Interrupt: pin B routed to IRQ 21
>	BIST result: 00
>	Region 0: I/O ports at d800 [size=256]
>	Region 1: Memory at fcdfe000 (64-bit, non-prefetchable) [size=4K]
>	Expansion ROM at fce00000 [disabled] [size=128K]
>	Capabilities: <available only to root>
>00: 05 90 c5 00 17 01 b0 02 01 00 00 01 08 20 80 80
>10: 01 d8 00 00 04 e0 df fc 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 c5 00
>30: 00 00 e0 fc dc 00 00 00 00 00 00 00 0b 02 28 19
>
>
> >
> >and any messages printed by the kernel when this occurs?
> >
> > > 2. I have two xeon processors which support HyperThreading technology
> > > installed. How do I know this feature has been properly opened? What 
I
> > > mean is how can I see 4 logical processors?
> >
> >
> >/proc/cpuinfo will show 4 processors with HT enabled, 2 with it
> >disabled.
> >
>Then How can I turn on the HT ?
>
>
> >Thanks,
> >Matt
> >
> >--
> >Matt Domsch
> >Sr. Software Engineer, Lead Engineer, Architect
> >Dell Linux Solutions www.dell.com/linux
> >Linux on Dell mailing lists @ http://lists.us.dell.com
> >
> >
>
>
>_________________________________________________________________
>ÏíÓÃÊÀ½çÉÏ×î´óµÄµç×ÓÓʼþϵͳ¡ª MSN Hotmail¡£  http://www.hotmail.com
>
>_______________________________________________
>Linux-PowerEdge mailing list
>Linux-PowerEdge at dell.com
>http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>Please read the FAQ at http://lists.us.dell.com/faq or search the list
>archives at http://lists.us.dell.com/htdig/
>

_________________________________________________________________
  




More information about the Linux-PowerEdge mailing list