MegaMgr

Jeremy_Sheard@Dell.com Jeremy_Sheard at Dell.com
Tue Aug 20 14:54:00 CDT 2002


Ronald,

What you are indicating by this email is you have an Adaptec PERC3/DI Raid
Controller but you are using an LSI (formely AMI) Megaraid Utility.  This is
not going to work.  You will need to download the "FAST CLI" for this Raid
Controller.  Verify what your Firmware is at on this controller also.

Thanks,

Jeremy Sheard
DELL Server Support


-----Original Message-----
From: Ronald Reed [mailto:rreed at ops.sgp.arm.gov]
Sent: Tuesday, August 20, 2002 2:45 PM
To: linux-poweredge
Subject: MegaMgr


I have a system with a Perc 3Di card. I want to add an additional drive 
to an exsisting array of drives without erasing what is already in the 
disk array. Is this possible? I don't see a way to do it in the megamgr 
program, or the card BIOS.

Ron Reed

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list
archives at http://lists.us.dell.com/htdig/




More information about the Linux-PowerEdge mailing list