Dell PE witch one ??
rbonfanti0005 at comcast.net
rbonfanti0005 at comcast.net
Fri Jan 25 16:02:00 CST 2008
I would like very much to load either 5.07 or 6.0 on a Dell Server BUT ??
Do I use an older PE 6350 or something else ??
any Help
-------------- Original message ----------------------
From: sco-poweredge-request at dell.com
> Send SCO-PowerEdge mailing list submissions to
> sco-poweredge at dell.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> or, via email, send a message with subject or body 'help' to
> sco-poweredge-request at dell.com
>
> You can reach the person managing the list at
> sco-poweredge-owner at dell.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of SCO-PowerEdge digest..."
>
>
> Today's Topics:
>
> 1. RE: SCO-PowerEdge Digest, Vol 31, Issue 3 (Mourad_Rebai at Dell.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 24 Jan 2008 18:25:31 -0000
> From: <Mourad_Rebai at Dell.com>
> Subject: RE: SCO-PowerEdge Digest, Vol 31, Issue 3
> To: <sco-poweredge at lists.us.dell.com>
> Message-ID:
> <CD1B35F1B93B3C40B2481AAF3AB13361556F7A at DUBX3M12.dub.emea.dell.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear All,
>
> The step to be taken on those cases is to check if first the server are
> SCO Certified and if so check the certified configuration data.
>
> So First check : http://wdb1.sco.com/chwp/owa/hch_search_form
>
> Naturally I did not find the servers on UnixWare 7.1.1 so I checked
> 7.1.4.
>
> Two examples :
>
> PE1900 with SAS 5/IR :
> http://wdb1.sco.com/chwp/owa/hch_model_cert_page?f_model_id=99030&f_rele
> ase_id=600&f_vendor_search_corp_id=
> PE2950 with PERC 5/IR :
> http://wdb1.sco.com/chwp/owa/hch_model_cert_page?f_model_id=99194&f_rele
> ase_id=600&f_vendor_search_corp_id=
>
> Also As previously said the TA126690 is very interesting :
>
>
> (http://wdb1.sco.com/kb/showta?taid=126690&qid=298749532&sid=2077794861&
> pgnum=1)
>
>
> Regards.
> M. REBAI
> DELL French Senior Server Analyst
>
>
> -----Original Message-----
> From: sco-poweredge-bounces at dell.com
> [mailto:sco-poweredge-bounces at dell.com] On Behalf Of
> sco-poweredge-request at dell.com
> Sent: jeudi 24 janvier 2008 18:00
> To: sco-poweredge-Lists
> Subject: SCO-PowerEdge Digest, Vol 31, Issue 3
>
> Send SCO-PowerEdge mailing list submissions to
> sco-poweredge at dell.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> or, via email, send a message with subject or body 'help' to
> sco-poweredge-request at dell.com
>
> You can reach the person managing the list at
> sco-poweredge-owner at dell.com
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of SCO-PowerEdge digest..."
>
>
> Today's Topics:
>
> 1. SCO-PowerEdge 2950 UnixWare 7.1.1 (Kimie Bender)
> 2. RE: SCO-PowerEdge 2950 UnixWare 7.1.1 (Jason Groves)
> 3. RE: SCO-PowerEdge Digest, Vol 31, Issue 2 (Mourad_Rebai at Dell.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 23 Jan 2008 16:27:13 -0700
> From: "Kimie Bender" <kimie at cqg.com>
> Subject: SCO-PowerEdge 2950 UnixWare 7.1.1
> To: <sco-poweredge at dell.com>
> Cc: Kimie Bender <kimie at cqg.com>
> Message-ID:
> <4CEB6A0515F3C54E9FC68A55F28698A404FF92F9 at d3smail.denver.cqg>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear helpdesk,
>
> I have been installing UnixWare 7.1.1 on Dell PowerEdge 2950.
> Currently, I can not find the correct HBA(s) drivers.
>
> If you could please help me out.
>
> Many thanks.
>
> --Kimie
>
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 24 Jan 2008 07:00:59 +0200
> From: "Jason Groves" <jason at ess-tech.co.za>
> Subject: RE: SCO-PowerEdge 2950 UnixWare 7.1.1
> To: "'Kimie Bender'" <kimie at cqg.com>, <sco-poweredge at dell.com>
> Message-ID:
>
> <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARdDFiUm2R0STT9++iwt8PcKA
> AAAQAAAAfkJtJ5Dpj0Sa1kxuVV9ozQEAAAAA at ess-tech.co.za>
>
> Content-Type: text/plain; charset="us-ascii"
>
> http://ftp.sco.com/pub/openserver6/600/drivers/mpt_810/README.hba.mpt.8.
> 1.0.
> txt
>
> have a look at this. This is the driver to use if you have the standard
> sata config. Not the perc 5i.
>
> -----Original Message-----
> From: sco-poweredge-bounces at dell.com
> [mailto:sco-poweredge-bounces at dell.com]
> On Behalf Of Kimie Bender
> Sent: 24 January 2008 01:27 AM
> To: sco-poweredge at dell.com
> Cc: Kimie Bender
> Subject: SCO-PowerEdge 2950 UnixWare 7.1.1
>
> Dear helpdesk,
>
> I have been installing UnixWare 7.1.1 on Dell PowerEdge 2950.
> Currently, I can not find the correct HBA(s) drivers.
>
> If you could please help me out.
>
> Many thanks.
>
> --Kimie
>
>
>
>
> _______________________________________________
> SCO-PowerEdge mailing list
> SCO-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search the list
> archives at http://lists.us.dell.com/htdig/
>
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 24 Jan 2008 11:31:46 -0000
> From: <Mourad_Rebai at Dell.com>
> Subject: RE: SCO-PowerEdge Digest, Vol 31, Issue 2
> To: <sco-poweredge at lists.us.dell.com>
> Message-ID:
>
> <CD1B35F1B93B3C40B2481AAF3AB13361556F75 at DUBX3M12.dub.emea.dell.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear Sir,
>
> The following link could be useful :
> http://wdb1.sco.com/kb/showta?taid=126690&qid=298749532&sid=2077794861&p
> gnum=1
> Article was written for SCO OpenServer 6.0.0 and UnixWare 7.1.4.
> 7.1.1 is pretty old, we may have some other hardware issues.
>
> In fact the PERC 5/I should use the SCO provided megasas driver
> (the last release should be 1.1).
>
> You can find the driver on the ftp.sco.com site.
>
> NOTE : SCO is not Dell supported Operating system.
>
>
> Regards.
> M. REBAI
> DELL French Senior Server Analyst
>
>
> -----Original Message-----
> From: sco-poweredge-bounces at dell.com
> [mailto:sco-poweredge-bounces at dell.com] On Behalf Of
> sco-poweredge-request at dell.com
> Sent: mercredi 23 janvier 2008 18:00
> To: sco-poweredge-Lists
> Subject: SCO-PowerEdge Digest, Vol 31, Issue 2
>
> Send SCO-PowerEdge mailing list submissions to
> sco-poweredge at dell.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> or, via email, send a message with subject or body 'help' to
> sco-poweredge-request at dell.com
>
> You can reach the person managing the list at
> sco-poweredge-owner at dell.com
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of SCO-PowerEdge digest..."
>
>
> Today's Topics:
>
> 1. RE: intsall unixware 7.11 on Dell Poweredge 2950 (Jason Groves)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 23 Jan 2008 16:29:48 +0200
> From: "Jason Groves" <jason at ess-tech.co.za>
> Subject: RE: intsall unixware 7.11 on Dell Poweredge 2950
> To: "'Xu Dihua'" <dinnerxu at gmail.com>, <sco-poweredge at dell.com>
> Message-ID:
>
> <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARdDFiUm2R0STT9++iwt8PcKA
> AAAQAAAAMn86WMT/v0KXGVuIEUSDYQEAAAAA at ess-tech.co.za>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Are you sure the 2950 has a PErc 5/i? remember it is an optional. A
> client of mine bought a 2950 and I had to use other drivers for the 1068
> chipset.
>
>
>
> http://ftp.sco.com/pub/openserver6/600/drivers/mpt_810/README.hba.mpt.8.
> 1.0.
> txt
>
>
>
> download and install these. Should work.
>
>
>
> _____
>
> From: sco-poweredge-bounces at dell.com
> [mailto:sco-poweredge-bounces at dell.com]
> On Behalf Of Xu Dihua
> Sent: 08 November 2007 04:35 AM
> To: sco-poweredge at dell.com
> Subject: intsall unixware 7.11 on Dell Poweredge 2950
>
>
>
> Hi,
>
> Dear sir ,
>
> I have some problem for installing unixwrare 7.11 on on Dell
> Poweredge 2950, especially for the drivers of PERC 5/i raid, i
> downloaded the oem drivers from LSI web ,the chip lsisas 1068, but the
> files(as the attached files.change the name with zip, and open it with
> winzip) i downloded the system can't loaded ,so what's the problem, i
> wish you reply! thank you
> --
> e-mail :dinnerxu at gmail.com <mailto:dinnerxu at gmail.com> tel :13797041936
> MSN: dinnerxu at hotmail.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.us.dell.com/pipermail/sco-poweredge/attachments/20080123/70
> ee82ee/attachment-0001.htm
>
> ------------------------------
>
> _______________________________________________
> SCO-PowerEdge mailing list
> SCO-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search the list
> archives at http://lists.us.dell.com/htdig/
>
> End of SCO-PowerEdge Digest, Vol 31, Issue 2
> ********************************************
>
>
>
> ------------------------------
>
> _______________________________________________
> SCO-PowerEdge mailing list
> SCO-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search the list
> archives at http://lists.us.dell.com/htdig/
>
> End of SCO-PowerEdge Digest, Vol 31, Issue 3
> ********************************************
>
>
>
> ------------------------------
>
> _______________________________________________
> SCO-PowerEdge mailing list
> SCO-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search the list archives
> at http://lists.us.dell.com/htdig/
>
> End of SCO-PowerEdge Digest, Vol 31, Issue 4
> ********************************************
More information about the SCO-PowerEdge
mailing list