SCO-PowerEdge Digest, Vol 31, Issue 3

Thu Jan 24 12:25:31 CST 2008

Dear All,

 The step to be taken on those cases is to check if first the server are
SCO Certified and if so check the certified configuration data.

 So First check : http://wdb1.sco.com/chwp/owa/hch_search_form

 Naturally I did not find the servers on UnixWare 7.1.1 so I checked
7.1.4.

 Two examples :

	PE1900 with SAS  5/IR  :
http://wdb1.sco.com/chwp/owa/hch_model_cert_page?f_model_id=99030&f_rele
ase_id=600&f_vendor_search_corp_id=
	PE2950 with PERC 5/IR  :
http://wdb1.sco.com/chwp/owa/hch_model_cert_page?f_model_id=99194&f_rele
ase_id=600&f_vendor_search_corp_id=

 Also As previously said the TA126690 is very interesting :

(http://wdb1.sco.com/kb/showta?taid=126690&qid=298749532&sid=2077794861&
pgnum=1)

Regards.
M. REBAI
DELL French Senior Server Analyst

-----Original Message-----
From: sco-poweredge-bounces at dell.com
[mailto:sco-poweredge-bounces at dell.com] On Behalf Of
sco-poweredge-request at dell.com
Sent: jeudi 24 janvier 2008 18:00
To: sco-poweredge-Lists
Subject: SCO-PowerEdge Digest, Vol 31, Issue 3

Send SCO-PowerEdge mailing list submissions to
	sco-poweredge at dell.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.us.dell.com/mailman/listinfo/sco-poweredge
or, via email, send a message with subject or body 'help' to
	sco-poweredge-request at dell.com

You can reach the person managing the list at
	sco-poweredge-owner at dell.com

When replying, please edit your Subject line so it is more specific than
"Re: Contents of SCO-PowerEdge digest..."

Today's Topics:

   1. SCO-PowerEdge 2950 UnixWare 7.1.1 (Kimie Bender)
   2. RE: SCO-PowerEdge 2950 UnixWare 7.1.1 (Jason Groves)
   3. RE: SCO-PowerEdge Digest, Vol 31, Issue 2 (Mourad_Rebai at Dell.com)

----------------------------------------------------------------------

Message: 1
Date: Wed, 23 Jan 2008 16:27:13 -0700
From: "Kimie Bender" <kimie at cqg.com>
Subject: SCO-PowerEdge 2950 UnixWare 7.1.1
To: <sco-poweredge at dell.com>
Cc: Kimie Bender <kimie at cqg.com>
Message-ID:
	<4CEB6A0515F3C54E9FC68A55F28698A404FF92F9 at d3smail.denver.cqg>
Content-Type: text/plain;	charset="us-ascii"

 Dear helpdesk,

I have been installing UnixWare 7.1.1 on Dell PowerEdge 2950.
Currently, I can not find the correct HBA(s) drivers.

If you could please help me out.  

Many thanks.

--Kimie

------------------------------

Message: 2
Date: Thu, 24 Jan 2008 07:00:59 +0200
From: "Jason Groves" <jason at ess-tech.co.za>
Subject: RE: SCO-PowerEdge 2950 UnixWare 7.1.1
To: "'Kimie Bender'" <kimie at cqg.com>, <sco-poweredge at dell.com>
Message-ID:

<!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARdDFiUm2R0STT9++iwt8PcKA
AAAQAAAAfkJtJ5Dpj0Sa1kxuVV9ozQEAAAAA at ess-tech.co.za>

Content-Type: text/plain;	charset="us-ascii"

http://ftp.sco.com/pub/openserver6/600/drivers/mpt_810/README.hba.mpt.8.
1.0.
txt

have a look at this. This is the driver to use if you have the standard
sata config. Not the perc 5i.

-----Original Message-----
From: sco-poweredge-bounces at dell.com
[mailto:sco-poweredge-bounces at dell.com]
On Behalf Of Kimie Bender
Sent: 24 January 2008 01:27 AM
To: sco-poweredge at dell.com
Cc: Kimie Bender
Subject: SCO-PowerEdge 2950 UnixWare 7.1.1

 Dear helpdesk,

I have been installing UnixWare 7.1.1 on Dell PowerEdge 2950.
Currently, I can not find the correct HBA(s) drivers.

If you could please help me out.  

Many thanks.

--Kimie

_______________________________________________
SCO-PowerEdge mailing list
SCO-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/sco-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list
archives at http://lists.us.dell.com/htdig/

------------------------------

Message: 3
Date: Thu, 24 Jan 2008 11:31:46 -0000
From: <Mourad_Rebai at Dell.com>
Subject: RE: SCO-PowerEdge Digest, Vol 31, Issue 2
To: <sco-poweredge at lists.us.dell.com>
Message-ID:

<CD1B35F1B93B3C40B2481AAF3AB13361556F75 at DUBX3M12.dub.emea.dell.com>
Content-Type: text/plain;	charset="us-ascii"

Dear Sir,

	The following link could be useful :
http://wdb1.sco.com/kb/showta?taid=126690&qid=298749532&sid=2077794861&p
gnum=1
	Article was written for SCO OpenServer 6.0.0 and UnixWare 7.1.4.
	7.1.1 is pretty old, we may have some other hardware issues.

	In fact the PERC 5/I should use the SCO provided megasas driver
(the last release should be 1.1).

	You can find the driver on the ftp.sco.com site.

	NOTE : SCO is not Dell supported Operating system.

Regards.
M. REBAI
DELL French Senior Server Analyst

-----Original Message-----
From: sco-poweredge-bounces at dell.com
[mailto:sco-poweredge-bounces at dell.com] On Behalf Of
sco-poweredge-request at dell.com
Sent: mercredi 23 janvier 2008 18:00
To: sco-poweredge-Lists
Subject: SCO-PowerEdge Digest, Vol 31, Issue 2

Send SCO-PowerEdge mailing list submissions to
	sco-poweredge at dell.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.us.dell.com/mailman/listinfo/sco-poweredge
or, via email, send a message with subject or body 'help' to
	sco-poweredge-request at dell.com

You can reach the person managing the list at
	sco-poweredge-owner at dell.com

When replying, please edit your Subject line so it is more specific than
"Re: Contents of SCO-PowerEdge digest..."

Today's Topics:

   1. RE: intsall unixware 7.11 on Dell Poweredge 2950 (Jason Groves)

----------------------------------------------------------------------

Message: 1
Date: Wed, 23 Jan 2008 16:29:48 +0200
From: "Jason Groves" <jason at ess-tech.co.za>
Subject: RE: intsall unixware 7.11 on Dell Poweredge 2950
To: "'Xu Dihua'" <dinnerxu at gmail.com>, <sco-poweredge at dell.com>
Message-ID:

<!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARdDFiUm2R0STT9++iwt8PcKA
AAAQAAAAMn86WMT/v0KXGVuIEUSDYQEAAAAA at ess-tech.co.za>

Content-Type: text/plain; charset="us-ascii"

Are you sure the 2950 has a PErc 5/i? remember it is an optional. A
client of mine bought a 2950 and I had to use other drivers for the 1068
chipset.

http://ftp.sco.com/pub/openserver6/600/drivers/mpt_810/README.hba.mpt.8.
1.0.
txt

download and install these. Should work.

  _____  

From: sco-poweredge-bounces at dell.com
[mailto:sco-poweredge-bounces at dell.com]
On Behalf Of Xu Dihua
Sent: 08 November 2007 04:35 AM
To: sco-poweredge at dell.com
Subject: intsall unixware 7.11 on Dell Poweredge 2950

Hi,

    Dear sir ,

    I have some problem for installing unixwrare 7.11 on on Dell
Poweredge 2950, especially for the drivers of PERC 5/i raid, i
downloaded the oem drivers from LSI web ,the chip lsisas 1068, but the
files(as the attached files.change the name with zip, and open it with
winzip) i downloded the system can't loaded ,so what's the problem, i
wish you reply! thank you
--
e-mail :dinnerxu at gmail.com  <mailto:dinnerxu at gmail.com> tel :13797041936
MSN:  dinnerxu at hotmail.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.us.dell.com/pipermail/sco-poweredge/attachments/20080123/70
ee82ee/attachment-0001.htm 

------------------------------

_______________________________________________
SCO-PowerEdge mailing list
SCO-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/sco-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list
archives at http://lists.us.dell.com/htdig/

End of SCO-PowerEdge Digest, Vol 31, Issue 2
********************************************

------------------------------

_______________________________________________
SCO-PowerEdge mailing list
SCO-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/sco-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list
archives at http://lists.us.dell.com/htdig/

End of SCO-PowerEdge Digest, Vol 31, Issue 3
********************************************