SCO-PowerEdge Digest, Vol 32, Issue 1

[Steve Dragonette]

Hi Kimie,

You will likely not be able to do a soft reboot on 7.1.1 on any modern 
PowerEdge
system. This issue has been resolved in UnixWare 7.1.4 but this
fix is not available for unsupported operating systems. If you are unable to
upgrade to 7.1.4 and need this to work on 7.1.1, I would suggest contacting
SCO Professional Services at http://sco.com/consulting/ to have this 
functionality
ported to 7.1.1.

Regards,

Steve Dragonette
SCO Global Services

> Date: Wed, 20 Feb 2008 14:13:04 -0700
> From: "Kimie Bender" <kimie at cqg.com>
> Subject: init 6 does not bring up system
> To: <sco-poweredge at dell.com>
> Cc: Kimie Bender <kimie at cqg.com>
> Message-ID:
> 	<4CEB6A0515F3C54E9FC68A55F28698A404FF93CE at d3smail.denver.cqg>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear Helpdesk,
>  
> I have installed UnixWare 7.1.1 on PowerEdge 2950.  The problem now I
> have been facing is "init 6" can shutdown the system but it does NOT
> bring up.  I have been getting message "Automatic Boot Procedure" which
> is from /etc/bootmsgs file and "hang" there 'forever'.  Each time I must
> power cycle to bring system up.  I can switch run level such as "init
> 2".
>  
> Please advice.  Many thanks!
>  
> --Kimie
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://lists.us.dell.com/pipermail/sco-poweredge/attachments/20080220/ea7b25b9/attachment-0001.htm 
>
> ------------------------------
>
> _______________________________________________
> SCO-PowerEdge mailing list
> SCO-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/
>
> End of SCO-PowerEdge Digest, Vol 32, Issue 1
> ********************************************
>
>