[UnixWare and Poweredge 2900] new driver on SCO web site

[Serveur]

Hello, I have made the test of the driver on a PE2900 with Perc5i 
controller configure in RAID 1 (mirroring). I used a diskette. After the 
installation of the driver it marks: “Unable to find has Root hardware 
disk”. thank you.

Fréd.

Jim Bonnet a écrit :
> Please try these drivers. They are the correct drivers for the perc5 
> controller. perc5 is not supported under the mpt driver.
>
> Jim Bonnet
> SCO Engineering Services
>
>
> ftp://ftpput.sco.com/tmp/megasas/README.hba.megasas.0.9.txt
> ftp://ftpput.sco.com/tmp/megasas/hba.megasas.0.9g.iso.gz
> ftp://ftpput.sco.com/tmp/megasas/hba.megasas.0.9g.image.gz
> ftp://ftpput.sco.com/tmp/megasas/hba.megasas.0.9g.iso
> ftp://ftpput.sco.com/tmp/megasas/hba.megasas.0.9g.image
> ftp://ftpput.sco.com/tmp/megasas/hba.megasas.0.9g.sumr
>
> The .iso's are iso hba disks to burn to cd, the .image files are for 
> floppies...
>
> Jim
>
>
>
> Leonard, Scott wrote:
>   
>> I have tried this driver on OSR6.0 as well, and it does not work.  The error "cannot determine the size of the drive" is the same error I get when I do not load any drivers.  
>>
>> This tells me the drive is detected but still not functioning.  If there is another solution to get around this error I would love to know.  
>>
>> I am very new to 6.0, and have been using osr5.0.7.  I have a feeling this is just a generic error to replace "no root disk detected."
>>
>> Unless I am misreading the error, I would also say that the PERC5i still does not work in SCO.
>>
>>
>> Scott Leonard
>> UNIX Systems
>> ADP Lightspeed
>>
>>
>> -----Original Message-----
>>
>> I have just tested it on a Dell 2900 (RAID 1, two discs) and it does not function on Unixware 7.1.4.
>> http://www.sco.com/support/update/download/release.php?rid=207
>> No disc detected for install UnixWare.
>>
>> Fréd
>>
>>
>>
>> This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
>>
>> _______________________________________________
>> SCO-PowerEdge mailing list
>> SCO-PowerEdge at dell.com
>> http://lists.us.dell.com/mailman/listinfo/sco-poweredge
>> Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/
>>   
>>     
>
>
>