RHEL 4 2.6.9-42.0.8.EL kernel breaks sound for me... (again!)

[Robert Berlinger]

Any other suggestions John?  I'm still not getting consistent sound.  I
just rebooted into the new 2.6.9-42.0.10.ELsmp kernel and no sound. 
lsmod shows snd_azx is loaded.  How can I prevent it from loading as you
recommend?  (And why is it loading if it's the wrong module?)

Thanks.

On 2/22/2007 11:54 AM, Robert Berlinger wrote:
> There's nothing in /etc/modprobe.conf referencing snd_azx.  Here's my
> modprobe.conf:
>
> alias scsi_hostadapter ahci
> alias eth0 tg3
> alias snd-card-0 snd-hda-intel
> options snd-card-0 index=0
> install snd-hda-intel /sbin/modprobe --ignore-install snd-hda-intel && /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-hda-intel { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-hda-intel
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
>   
> Anywhere else I should be looking?  Also, just reverting back to the
> .3.EL kernel gets the sound back, so that doesn't seem to me to be a
> modprobe issue.  Thanks.
>
> On 2/22/2007 11:30 AM, John_Hull at Dell.com wrote:
>> You need to make sure that the snd_azx module doesn't get loaded, as it conflicts with snd-hda-intel. Check to verify that there are no references to snd-azx in the /etc/modprobe.conf file, and if there are, change them to snd-hda-intel
>>
>>
>> -----Original Message-----
>> From: linux-precision-bounces at dell.com on behalf of Robert Berlinger
>> Sent: Thu 2/22/2007 10:10 AM
>> To: linux-precision-Lists
>> Subject: RHEL 4 2.6.9-42.0.8.EL kernel breaks sound for me... (again!)
>>  
>> I was wondering why it was so quiet in my office :-).  I have a
>> Precision 380 running RHEL 4, up to date with patches.  If I revert to
>> the 2.6.9-42.0.3.EL kernel sound works fine.  On 2.6.9-42.0.8.EL (SMP or
>> no SMP) I get no sound.  If I do a "dmesg | grep snd" on .8.EL kernel, I
>> get the following errors:
>>
>> snd_azx: disagrees about version of symbol snd_hda_bus_new
>> snd_azx: Unknown symbol snd_hda_bus_new
>> snd_azx: disagrees about version of symbol snd_hda_build_pcms
>> snd_azx: Unknown symbol snd_hda_build_pcms
>> snd_azx: disagrees about version of symbol snd_hda_codec_new
>> snd_azx: Unknown symbol snd_hda_codec_new
>> snd_azx: disagrees about version of symbol snd_hda_queue_unsol_event
>> snd_azx: Unknown symbol snd_hda_queue_unsol_event
>> snd_azx: disagrees about version of symbol snd_hda_suspend
>> snd_azx: Unknown symbol snd_hda_suspend
>> snd_azx: disagrees about version of symbol snd_hda_resume
>> snd_azx: Unknown symbol snd_hda_resume
>> snd_azx: disagrees about version of symbol snd_hda_build_controls
>> snd_azx: Unknown symbol snd_hda_build_controls
>>
>>
>> I have snd-hda-intel-1.0.6p-9dkms installed, along with dmks-2.0.5-1. 
>> Suggestions?
>>
>>   
>
> -- 
> Robert N. Berlinger
> Manager, Network Technology and Security
> Albert Einstein College of Medicine

-- 
Robert N. Berlinger
Manager, Network Technology and Security
Albert Einstein College of Medicine

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-precision/attachments/20070227/fd7cccfc/attachment.htm