snd-hda-intel-1.0.6p-8dkms.noarch.rpm
Gary Gatling
gsgatlin at eos.ncsu.edu
Tue Oct 10 15:09:02 CDT 2006
Also,
I do see this:
[root at moreproof gsgatlin]# /sbin/modprobe -l | grep snd-azx
/lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/azx/snd-azx.ko
[root at moreproof gsgatlin]# /sbin/modprobe -l | grep snd-hda
/lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/hda/snd-hda-codec.ko
/lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/azx/snd-hda-codec.ko
Cheers,
On Tue, 10 Oct 2006, Gary Gatling wrote:
>
> I don't think so. I discovered that the snd-hda-intel rpm changes the
> /etc/modprobe.conf file when it gets installed the first time. Here is
> what it looks like now:
>
> alias eth0 tg3
> alias scsi_hostadapter ata_piix
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
> alias snd-card-0 snd-hda-intel
> options snd-card-0 index=0
> install snd-hda-intel /sbin/modprobe --ignore-install snd-hda-intel &&
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-hda-intel { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
> /sbin/modprobe -r --ignore-remove snd-hda-intel
>
> (Sorry it wraped)
>
> Anyways, is there something else I could do to check for that possibility?
> (That the snd-azx module is being loaded also)
>
> Cheers,
>
>
> On Tue, 10 Oct 2006 John_Hull at Dell.com wrote:
>
>> Definitely should not be receiving symbol problems from the driver. Is
>> the snd-azx module being loaded also?
>>
>>> -----Original Message-----
>>> From: Gary Gatling [mailto:gsgatlin at eos.ncsu.edu]
>>> Sent: Tuesday, October 10, 2006 2:33 PM
>>> To: Hull, John
>>> Cc: linux-precision-Lists
>>> Subject: RE: snd-hda-intel-1.0.6p-8dkms.noarch.rpm
>>>
>>>
>>> I am trying to get the rpm to work on our precision 380
>>> workstations running RHEL 4.4. Kernel is 2.6.9-42.0.3.ELsmp.
>>> (Just updated a few days ago) Sometimes it works. Sometimes
>>> it doesn't. I can't figure out why. Thats why I asked for
>>> source rpm. `cause I can wrap my head around source rpms
>>> since I build them myself. This dkms stuff is not as well
>>> understood by me. Sorry. When it doesn't work, I see stuff
>>> like this is /var/log/messages
>>>
>>> --------------------------------------------------------------
>>> ------------
>>>
>>> Oct 10 13:20:38 moreproof kernel: snd_hda_intel: disagrees
>>> about version of symbol snd_hda_bus_new Oct 10 13:20:38
>>> moreproof kernel: snd_hda_intel: Unknown symbol
>>> snd_hda_bus_new Oct 10 13:20:38 moreproof kernel:
>>> snd_hda_intel: disagrees about version of symbol
>>> snd_hda_build_pcms Oct 10 13:20:38 moreproof kernel:
>>> snd_hda_intel: Unknown symbol snd_hda_build_pcms
>>>
>>> --------------------------------------------------------------
>>> ------------
>>>
>>> And it goes on and on. Suggestions for what I can do to
>>> correct this situation? I saved the output from the install
>>> of the snd-hda-intel rpm.
>>> The dkms install produced little output.
>>>
>>> --------------------------------------------------------------
>>> ------------
>>>
>>> Fetching Obsoletes list for channel: rhel-i386-ws-4...
>>>
>>> Fetching Obsoletes list for channel: realmlinux-ws4...
>>>
>>> Fetching Obsoletes list for channel: ITECS-desktops-ws4...
>>>
>>> Fetching rpm headers...
>>>
>>> Name Version Rel
>>> ----------------------------------------------------------
>>> snd-hda-intel 1.0.6p 9dkms
>>> noarch
>>>
>>>
>>> Testing package set / solving RPM inter-dependencies...
>>> snd-hda-intel-1.0.6p-9dkms. Retrieved.
>>> Preparing
>>> Installing /var/spool/up2date/snd-hda-intel-1.0.6p-9dkms.noarch.rpm...
>>>
>>> Loading kernel module source and prebuilt module binaries (if
>>> any) Installing prebuilt kernel module binaries (if any)
>>>
>>> Kernel preparation unnecessary for this kernel. Skipping...
>>> Building module:
>>> cleaning build area....
>>> make KERNELRELEASE=2.6.9-42.0.3.ELsmp -C
>>> /lib/modules/2.6.9-42.0.3.ELsmp/build M
>>> =/var/lib/dkms/snd-hda-intel/1.0.6p/build......
>>> cleaning build area....
>>>
>>> DKMS: build Completed.
>>> Running module version sanity check.
>>>
>>> snd-hda-intel.ko:
>>> - Original module
>>> - No original module exists within this kernel
>>> - Installation
>>> - Installing to
>>> /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/hda//
>>>
>>> snd-hda-codec.ko:
>>> - Original module
>>> - Found
>>> /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/azx/snd-hda-codec.ko
>>> - Storing in
>>> /var/lib/dkms/snd-hda-intel/original_module/2.6.9-42.0.3.ELsmp/i
>>> 686/
>>> - Archiving for uninstallation purposes
>>> - Installation
>>> - Installing to
>>> /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/hda//
>>>
>>>
>>> snd.ko:
>>> - Original module
>>> - Found /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/core//snd.ko
>>> - Storing in
>>> /var/lib/dkms/snd-hda-intel/original_module/2.6.9-42.0.3.ELsmp/i
>>> 686/
>>> - Archiving for uninstallation purposes
>>> - Installation
>>> - Installing to
>>> /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/core//
>>>
>>> depmod....
>>>
>>> DKMS: install Completed.
>>>
>>> Your DKMS tree now includes:
>>> snd-hda-intel, 1.0.6p, 2.6.9-5.ELsmp, x86_64: built
>>> snd-hda-intel, 1.0.6p, 2.6.9-5.ELsmp, i686: built
>>> snd-hda-intel, 1.0.6p, 2.6.9-42.0.3.ELsmp, i686: installed
>>> (original_module exists) snd-hda-intel, 1.0.6p, 2.6.9-5.EL,
>>> x86_64: built snd-hda-intel, 1.0.6p, 2.6.9-5.EL, i686: built
>>>
>>> --------------------------------------------------------------
>>> ------------
>>>
>>>
>>> On Wed, 4 Oct 2006 John_Hull at Dell.com wrote:
>>>
>>>> We didn't create a source RPM for that. That RPM was
>>> created using the
>>>> dkms mkrpm command, and all the sources and the spec file are
>>>> contained in theat RPM. Not sure what your needs are, but DKMS can
>>>> probably take care of them for you
>>>>
>>>>> -----Original Message-----
>>>>> From: linux-precision-bounces at dell.com
>>>>> [mailto:linux-precision-bounces at dell.com] On Behalf Of Gary Gatling
>>>>> Sent: Wednesday, October 04, 2006 10:53 AM
>>>>> To: linux-precision-Lists
>>>>> Subject: snd-hda-intel-1.0.6p-8dkms.noarch.rpm
>>>>>
>>>>>
>>>>> Greetings,
>>>>>
>>>>> Is there any way I could get the source rpm for
>>>>> snd-hda-intel-1.0.6p-8dkms? which was downloaded from
>>>>> http://linux.dell.com/files/audio/intel-high-def/rhel4/
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Gary Gatling | ITECS Systems
>>>>> ITECS, BOX 7901 | Technology Support Analyst
>>>>> NCSU, Raleigh, NC | Email: gsgatlin at eos.ncsu.edu
>>>>> 27695-7901 | Phone: (919) 513-4572 (5B Page Hall)
>>>>>
>>>>> _______________________________________________
>>>>> Linux-Precision mailing list
>>>>> Linux-Precision at dell.com
>>>>> http://lists.us.dell.com/mailman/listinfo/linux-precision
>>>>> Please read the FAQ at http://lists.us.dell.com/faq or search the
>>>>> list archives at http://lists.us.dell.com/htdig/
>>>>>
>>>>
>>>
>>> Gary Gatling | ITECS Systems
>>> ITECS, BOX 7901 | Technology Support Analyst
>>> NCSU, Raleigh, NC | Email: gsgatlin at eos.ncsu.edu
>>> 27695-7901 | Phone: (919) 513-4572 (5B Page Hall)
>>>
>>
>
> Gary Gatling | ITECS Systems
> ITECS, BOX 7901 | Technology Support Analyst
> NCSU, Raleigh, NC | Email: gsgatlin at eos.ncsu.edu
> 27695-7901 | Phone: (919) 513-4572 (5B Page Hall)
>
> _______________________________________________
> Linux-Precision mailing list
> Linux-Precision at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-precision
> Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/
>
Gary Gatling | ITECS Systems
ITECS, BOX 7901 | Technology Support Analyst
NCSU, Raleigh, NC | Email: gsgatlin at eos.ncsu.edu
27695-7901 | Phone: (919) 513-4572 (5B Page Hall)
More information about the Linux-Precision
mailing list