snd-hda-intel-1.0.6p-8dkms.noarch.rpm

[Gary Gatling]

I am trying to get the rpm to work on our precision 380 workstations 
running RHEL 4.4. Kernel is 2.6.9-42.0.3.ELsmp. (Just updated a 
few days ago) Sometimes it works. Sometimes it doesn't. I can't figure 
out why. Thats why I asked for source rpm. `cause I can wrap my head 
around source rpms since I build them myself. This dkms stuff is not as 
well understood by me. Sorry. When it doesn't work, I see stuff like this 
is /var/log/messages

--------------------------------------------------------------------------

Oct 10 13:20:38 moreproof kernel: snd_hda_intel: disagrees about version 
of symbol snd_hda_bus_new
Oct 10 13:20:38 moreproof kernel: snd_hda_intel: Unknown symbol 
snd_hda_bus_new
Oct 10 13:20:38 moreproof kernel: snd_hda_intel: disagrees about version 
of symbol snd_hda_build_pcms
Oct 10 13:20:38 moreproof kernel: snd_hda_intel: Unknown symbol 
snd_hda_build_pcms

--------------------------------------------------------------------------

And it goes on and on. Suggestions for what I can do to correct this 
situation? I saved the output from the install of the snd-hda-intel rpm.
The dkms install produced little output.

--------------------------------------------------------------------------

Fetching Obsoletes list for channel: rhel-i386-ws-4...

Fetching Obsoletes list for channel: realmlinux-ws4...

Fetching Obsoletes list for channel: ITECS-desktops-ws4...

Fetching rpm headers...

Name                                    Version        Rel
----------------------------------------------------------
snd-hda-intel                           1.0.6p         9dkms 
noarch


Testing package set / solving RPM inter-dependencies...
snd-hda-intel-1.0.6p-9dkms.  Retrieved.
Preparing
Installing /var/spool/up2date/snd-hda-intel-1.0.6p-9dkms.noarch.rpm...

Loading kernel module source and prebuilt module binaries (if any)
Installing prebuilt kernel module binaries (if any)

Kernel preparation unnecessary for this kernel.  Skipping...
Building module:
cleaning build area....
make KERNELRELEASE=2.6.9-42.0.3.ELsmp -C 
/lib/modules/2.6.9-42.0.3.ELsmp/build M
=/var/lib/dkms/snd-hda-intel/1.0.6p/build......
cleaning build area....

DKMS: build Completed.
Running module version sanity check.

snd-hda-intel.ko:
  - Original module
    - No original module exists within this kernel
  - Installation
    - Installing to /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/hda//

snd-hda-codec.ko:
  - Original module
    - Found 
/lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/azx/snd-hda-codec.ko
    - Storing in 
/var/lib/dkms/snd-hda-intel/original_module/2.6.9-42.0.3.ELsmp/i
686/
    - Archiving for uninstallation purposes
  - Installation
    - Installing to /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/hda//


snd.ko:
  - Original module
    - Found /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/core//snd.ko
    - Storing in 
/var/lib/dkms/snd-hda-intel/original_module/2.6.9-42.0.3.ELsmp/i
686/
    - Archiving for uninstallation purposes
  - Installation
    - Installing to /lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/core//

depmod....

DKMS: install Completed.

Your DKMS tree now includes:
snd-hda-intel, 1.0.6p, 2.6.9-5.ELsmp, x86_64: built
snd-hda-intel, 1.0.6p, 2.6.9-5.ELsmp, i686: built
snd-hda-intel, 1.0.6p, 2.6.9-42.0.3.ELsmp, i686: installed 
(original_module exists)
snd-hda-intel, 1.0.6p, 2.6.9-5.EL, x86_64: built
snd-hda-intel, 1.0.6p, 2.6.9-5.EL, i686: built

--------------------------------------------------------------------------


On Wed, 4 Oct 2006 John_Hull at Dell.com wrote:

> We didn't create a source RPM for that. That RPM was created using the
> dkms mkrpm command, and all the sources and the spec file are contained
> in theat RPM. Not sure what your needs are, but DKMS can probably take
> care of them for you
>
>> -----Original Message-----
>> From: linux-precision-bounces at dell.com
>> [mailto:linux-precision-bounces at dell.com] On Behalf Of Gary Gatling
>> Sent: Wednesday, October 04, 2006 10:53 AM
>> To: linux-precision-Lists
>> Subject: snd-hda-intel-1.0.6p-8dkms.noarch.rpm
>>
>>
>> Greetings,
>>
>> Is there any way I could get the source rpm for
>> snd-hda-intel-1.0.6p-8dkms? which was downloaded from
>> http://linux.dell.com/files/audio/intel-high-def/rhel4/
>>
>> Cheers,
>>
>> Gary Gatling      | ITECS Systems
>> ITECS, BOX 7901   | Technology Support Analyst
>> NCSU, Raleigh, NC | Email: gsgatlin at eos.ncsu.edu
>> 27695-7901        | Phone: (919) 513-4572 (5B Page Hall)
>>
>> _______________________________________________
>> Linux-Precision mailing list
>> Linux-Precision at dell.com
>> http://lists.us.dell.com/mailman/listinfo/linux-precision
>> Please read the FAQ at http://lists.us.dell.com/faq or search
>> the list archives at http://lists.us.dell.com/htdig/
>>
>

Gary Gatling      | ITECS Systems
ITECS, BOX 7901   | Technology Support Analyst
NCSU, Raleigh, NC | Email: gsgatlin at eos.ncsu.edu
27695-7901        | Phone: (919) 513-4572 (5B Page Hall)