ATI driver installation under Fedora Core 4 (and or 5) FireGL V3100 PCIE
Nicolas BERCHER
bercher at teledetection.fr
Mon Oct 2 11:16:28 CDT 2006
Hi!
I'm trying to install an ATI graphic driver for my DELL Precision 670.
I'm currently using this configuration:
- DELL Precision 670, Bios revision A07 (flashed under windows 2k)
- ATI FireGL V3100 PCIE (see below for more details)
- Fedora Core 4 (will update to fedora 5 soon)
- Xorg 6.8.2 (see below for my xorg.conf file)
- SMP kernel version 2.6.17-1.2142_FC4smp
- ATI driver version 8.26.18
I'am encountering problems while using the DRI Xorg module (enabled via
xorg.conf): when I enable DRI, X hangs up (an restarts) when I call an
OpenGL depend programs or simply one of the "fgl*" utility (fglxinfo,
fgl_glxgears, etc.).
Note that:
- I'm using RPM packages from the Livna repository:
*kernel-module-fglrx-2.6.17-1.2142_FC4smp-8.26.18-1.lvn4*,
*fglrx_6_8_0-8.25.18-1* and *ati-fglrx-8.26.18-1.lvn4*
- The first time I installed the ATI driver (not SMP kernel
2.6.16-1.2111_FC4), it was working good, but it is impossible for me to
get back to this working configuration (even with a SMP kernel or not
SMP one).
- I've also tryied the ATI binary installer
- After yum finished the RPMs installation, I run the command
aticonfig --initial
which creates a set of sections in my xorg.conf file.
Does anyone here know if there's something special with my configuration ?
Anything a forgot to do ?
Thank you for any help !
Nicolas.
---- xorg.conf:
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "KernelModuleParm" "locked-userpages=0"
Option "VideoOverlay" "on"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
---- lshw output:
FireGL V3100 PCIE:
*-display:0
description: VGA compatible controller
product: RV370 5B64 [FireGL V3100 (PCIE)]
vendor: ATI Technologies Inc
physical id: 0
bus info: pci at 05:00.0
version: 80
size: 128MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master cap_list
configuration: latency=0
resources: iomemory:d0000000-d7ffffff ioport:bc00-bcff
iomemory:df9e0000-df9effff irq:11
--
Nicolas BERCHER
Doctorant UMR TETIS (P.Kosuth)
Cemagref-CIRAD-ENGREF
nicolas.bercher at teledetection.fr
Maison de la Télédétection
500 rue J.F. Breton
F-34093 MONTPELLIER Cedex 5
(bureau 16)
Tél : 33 (0)4 67 54 87 16
Fax : 33 (0)4 67 54 87 00
--------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-precision/attachments/20061002/ff7aa5f4/attachment.htm
More information about the Linux-Precision
mailing list