No sound after upgrading to RHEL4.4

[Rogelio_Noriega at Dell.com]

Gary,

	That RPM should have worked, silly question did you make sure
the audio is not muted using alsamixer or that the on-board audio isn't
turned off in BIOS.

Roger

-----Original Message-----
From: linux-precision-bounces at dell.com
[mailto:linux-precision-bounces at dell.com] On Behalf Of Gary Gatling
Sent: Wednesday, August 23, 2006 12:35 PM
To: linux-precision-Lists
Subject: RE: No sound after upgrading to RHEL4.4


Greetings,

I'm afriad that didn't work. My system now thinks its sound card is a 
snd-hda-intel within system-config-soundcard. And I can't hear a test 
sound from within the program.

I am going to re-install my box to get back to my original
configuration. 
Any other suggestions for getting the audio to work on Precision 380 
workstations after getting RHEL 4 update 4?

Thanks,

On Wed, 23 Aug 2006 Rogelio_Noriega at Dell.com wrote:

> Try this RPM it should fix your problem.
>
http://support.dell.com/support/downloads/download.aspx?c=us&cs=555&l=en
>
&s=biz&releaseid=R109066&SystemID=LATITUDE%20PRECISION%20690&os=LIN4&osl
>
=en&deviceid=8907&devlib=0&typecnt=1&vercnt=1&formatcnt=1&libid=3&fileid
> =141621
>
> Roger
>
> -----Original Message-----
> From: linux-precision-bounces at dell.com
> [mailto:linux-precision-bounces at dell.com] On Behalf Of Gary Gatling
> Sent: Wednesday, August 23, 2006 10:19 AM
> To: linux-precision-Lists
> Subject: No sound after upgrading to RHEL4.4
>
>
> Greetings,
>
> I have noticed that sound stopped working on my precsion 380
workstation
>
> after RHEL 4 update 4. I'm pretty sure it was working before the
update.
>
> Here is my  /etc/modprobe.conf (Some lines wrapped though)
>
> alias eth0 tg3
> alias scsi_hostadapter ata_piix
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
> alias snd-card-0 snd-azx
> options snd-card-0 index=0
> install snd-azx /sbin/modprobe --ignore-install snd-azx &&
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-azx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
> /sbin/modprobe -r --ignore-remove snd-azx
>
> Soundcard detection via system-config-soundcard finds the snd_azx card
> but
> I hear no sound from the test. Sound works fine on the Precision 370.
> Its
> only the 380 workstation that is affected.
>
> This is runninng kernel 2.6.9-42.ELsmp x86_64.
>
> We have about 65 of these Precision 380 workstations running RHEL 4.4
in
>
> various public computing labs in the College of Engineering at NCSU.
>
> Cheers,
>
> Gary Gatling      | ITECS Systems
> ITECS, BOX 7901   | Technology Support Analyst
> NCSU, Raleigh, NC | Email: gsgatlin at eos dot ncsu dot edu
> 27695-7901        | Phone: (919) 513-4572 (5B Page Hall)
>
> _______________________________________________
> Linux-Precision mailing list
> Linux-Precision at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-precision
> Please read the FAQ at http://lists.us.dell.com/faq or search the list
> archives at http://lists.us.dell.com/htdig/
>

Gary Gatling      | ITECS Systems
ITECS, BOX 7901   | Technology Support Analyst
NCSU, Raleigh, NC | Email: gsgatlin at eos dot ncsu dot edu
27695-7901        | Phone: (919) 513-4572 (5B Page Hall)

_______________________________________________
Linux-Precision mailing list
Linux-Precision at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-precision
Please read the FAQ at http://lists.us.dell.com/faq or search the list
archives at http://lists.us.dell.com/htdig/