[Linux-PowerEdge] Talking to DRAC card from OS
raubvogel at gmail.com
Thu Apr 28 14:50:35 CDT 2016
On Thu, Apr 28, 2016 at 3:05 PM, Jeff Palmer <jeff at palmerit.net> wrote:
> The two utilities you'll primarily want to play with will be omreport
> and omconfig.
> using omreport, you can see the current status with omconfig, you
> can change it.
> omreport chassis remoteaccess -?
Thanks for the info! I now can see!
[root at vhmost3 ~]# omreport chassis remoteaccess config=nic
Enable NIC : true
Primary Network : LOM2
Failover Network : None
MAC Address : 44-A8-42-AC-FF-D6
Enable IPMI Over LAN : false
Channel Privilege Level Limit : Administrator
New Encryption Key : 0000000000000000000000000000000000000000
Enable VLAN ID : false
VLAN ID : 1
Priority : 0
IP Address Source : Static
IP Address : 172.22.134.71
Subnet Mask : 255.255.255.192
Gateway Address : 172.22.135.65
[root at vhmost3 ~]#
1) 172.22.134.71 is on the same vlan as the IP I ssh into machine.
Gateway and netmask are right.
2) It should be vlan 304/tagged, not 1/untagged
3) I am the one who moved it from being in an untagged vlan (1) to a
tagged one (304). I know I did not mess with the drac when I did that.
4) Who is LOM2? This box has 3 NICs: 2 normal (ending with :D4 and
:D5; the rest of the MAC address for the other 2 nics matches the
above) and the drac one. Is there a naming convention (Maybe LOM0, 1,
and 2)? If it is, how could the card match it since it was purchased
> On Thu, Apr 28, 2016 at 7:29 AM, Mauricio Tavares <raubvogel at gmail.com> wrote:
>> I deployed a card to one of our poweredges E320 and when I tried
>> to connect to it using its ethernet port, I get no connectivity in
>> said port. So, since the host runs Linux and has openmanager, I was
>> thinking on trying to connect to it from the OS and figure out what is
>> going on. How can I do the deed?
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
> Jeff Palmer
More information about the Linux-PowerEdge