[Linux-PowerEdge] OMSA8.1 on RHEL/CentOS 7.1 workaround

Wes Dillingham wes_dillingham at harvard.edu
Fri May 8 19:47:38 CDT 2015


Ive attempted to make the new OMSA 8.1 work on some 11th-Gen hardware
running CentOS 7.1 by using the following method described earlier on this
list:

* patch the LSI middleware to read an alternate sysfs attribute. e.g to
read /sys/.../megaraid_sas/version instead:

>* sed -i -e 's/\x00release_date\x00/\x00version\x00\x00\x00\x00\x00\x00/' /opt/dell/srvadmin/lib64/libstorelib.so.4.20.1-0
*

This method does work, but ultimately OMSA eventually goes back to the
state where it cannot detect the PERC card. Any ideas on making this fix
persistent, anyone else experiencing a similar issue?


-- 
Respectfully,

Wes Dillingham
wes_dillingham at harvard.edu
Research Computing | Infrastructure Engineer
Harvard University | 38 Oxford Street, Cambridge, Ma 02138 | Room 211
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20150508/649a1dc4/attachment.html 


More information about the Linux-PowerEdge mailing list