[Linux-PowerEdge] DSU website instructions

Kalyan_Moharla at DELL.com Kalyan_Moharla at DELL.com
Fri Aug 28 01:08:36 CDT 2015

Dell Customer Communication

There is NO typo in the install instructions. The table shown below as in the web page are the differences between the tradition Dell YUM repository and the DSU repository. These are the differences and the document is correct. Please get back to us if you have any questions.
Command Difference between Dell Linux Repository and Dell System Update
Dell Linux Repository Commands

Dell System Update Commands

Setting Up Repository
1) wget -q -O - http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash
2) yum install dell_ft_install
3) yum install $(bootstrap_firmware)

1) wget -q -O - http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash
2) yum install dell-system-update

Inventorying Firmware

dsu --inventory

Updating Firmware



-----Original Message-----
From: linux-poweredge-bounces-Lists On Behalf Of Stephen Berg (Contractor)
Sent: Thursday, August 27, 2015 6:52 PM
To: linux-poweredge-Lists
Subject: [Linux-PowerEdge] DSU website instructions

There's a typo on the install instructions on http://linux.dell.com/repo/hardware/DSU_15.08.00/

The commands for setting up the repos for both the DLR and new DSU are the same.

"1) wget -q -O -
http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash"

The DSU version should be:
"1) wget -q -O - http://linux.dell.com/repo/hardware/dsu/bootstrap.cgi | bash"

Stephen Berg
Systems Administrator
NRL Code: 7320
Office: 228-688-5738
stephen.berg.ctr at nrlssc.navy.mil

Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20150828/27d07ab1/attachment.html 

More information about the Linux-PowerEdge mailing list