[Linux-PowerEdge] error installing dell_ft_install

Austin Murphy austin.murphy at gmail.com
Fri Oct 17 15:39:17 CDT 2014


On Fri, Oct 17, 2014 at 12:35 PM, Michael Tiernan <mtiernan at mit.edu> wrote:

>
> I'd like to see something a smidge more "official" such as something that tells us how to decipher things like:
>    "for_system_ven_0x1028_dev_0x048a"
>
>
Those are in the format of PCI IDs.  Match with the output of  "lspci
-nnvvv" and look for the info in brackets.

For example:
I have an R610 with a PERC H700 that shows up in lspci -nnvvv like this:

 03:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS
2108 [Liberator] [1000:0079] (rev 05)
Subsystem: Dell PERC H700 Integrated [1028:1f17]
 ...

The matching firmware RPM is:

 PERC_H700_Integrated_ven_0x1000_dev_0x0079_subven_0x1028_subdev_0x1f17-a12-1


For things that don't have PCI IDs, like system BIOS, ven refers to Dell
and dev refers to the base system (like R610).  This shows up lots of times
in the lspci output, including as the "Subsystem" of the "00:00.0 Host
bridge".  Example:

00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port
[8086:3403] (rev 13)
Subsystem: Dell PowerEdge R610 I/O Hub to ESI Port [1028:0236]


With the right syntax, you can search for all these PCI IDs directly in
yum.


Austin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20141017/ed512957/attachment.html 


More information about the Linux-PowerEdge mailing list