[Linux-PowerEdge] How to monitor RAID health on PowerEdge from Ubuntu?
silvertip257 at gmail.com
Wed Jun 18 11:45:57 CDT 2014
On Wed, Jun 18, 2014 at 8:15 AM, SilverTip257 <silvertip257 at gmail.com>
> Date: Mon, 16 Jun 2014 14:23:38 -0600
>> From: waz0wski <list at mass-distortion.net>
>> Subject: Re: [Linux-PowerEdge] How to monitor RAID health on PowerEdge
>> from Ubuntu?
>> To: linux-poweredge at dell.com
>> Message-ID: <e4eeae17c0d7eeb77c9c9611266b6d32 at mass-distortion.net>
>> Content-Type: text/plain; charset=US-ASCII; format=flowed
>> I don't install/utilize openmanage. I use the MegaCLI tools  for
>> checking RAID status.
> There's nothing wrong with the MegaCLI tools (certainly a fair bit lighter
> than installing openmanage).
> It is possible to use the openmanage tools to check RAID status.
> omreport storage vdisk
> omreport storage vdisk controller=0 vdisk=0
> omreport storage vdisk controller=0 vdisk=1
> Also, if the LSI MegaRAID sas_snmp package (from LSI themselves) is
> installed, a script is added to snmpd config. From there an OID can be
> polled via SNMP to check the health status.
> pass .188.8.131.52.4.1.3582 /usr/sbin/lsi_mrdsnmpmain
>> Puppet executes MegaCLI and parses a few output strings to put RAID
>> status in MOTD of nodes,
> I'm working off Red Hat systems as opposed to Ubuntu, so I don't have the
> cronjob/motd feature (though it wouldn't be difficult to add). I'd prefer
> to leave the health status monitoring to the Network Monitoring System
>> A cron job is used to run MegaCLI to check RAID health status, and send
>> SNMP traps on certain RAID/disk events to monitoring system (zenoss)
> In my environment, Nagios polls the OID listed above for the MegaRAID
It would be proper for me to include a link to the Nagios check script...
>> -  http://hwraid.le-vert.net/wiki/DebianPackages
>> On 2014-06-16 12:19, Peng Yu wrote:
>> > Hi,
>> > https://wiki.ubuntu.com/OpenManage
>> > I see the above link. But I'm not sure if it is still current. I want
>> > to monitor the health of RAID in PowerEdge. Could anybody let me know
>> > what is the best practice on Ubuntu? (I have LTS 14.04)
> // SilverTip257 //
// SilverTip257 //
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Linux-PowerEdge