[Linux-PowerEdge] PERC H700 activate disk without reboot
alex at biotec.tu-dresden.de
Fri Dec 12 08:47:17 CST 2014
the one shipped with linux-3.2.61:
modinfo megaraid_sas mpt2sas mptbase | egrep "^version|descr"
description: LSI MegaRAID SAS Driver
description: LSI MPT Fusion SAS 2.0 Device Driver
description: Fusion MPT base driver
On 12/12/2014 03:28 PM, George Machitidze wrote:
> Hi Alex,
> Which versions of controller driver/packages have you installed?
> George Machitidze
> 12 დეკ, 2014 18:25, "Alex Mestiashvili" <alex at biotec.tu-dresden.de
> <mailto:alex at biotec.tu-dresden.de>> დაწერა:
> After inserting a new disk to Dell PE R710 with PERC H700 adapter
> I can
> see it via omreport or with megacli tool, but can not make it
> visible to
> the system - Debian Wheezy with kernel 3.2.61.
> After issuing host_rescan:
> echo '- - -' >/sys/class/scsi_host/host0/scan
> I see in dmesg that the disk is recognized by the kernel, but still do
> not see it in fdisk/lsblk.. output.
> I noticed that omreport shows the new disk status as Ready and not
> Online, but it seems that I can not change the status using omconfig:
> omconfig storage pdisk action=online controller=0 pdisk=1:0:4
> Operation disabled. Read, action=online
> Refer to the documentation for more information.
> megacli fails here too:
> megacli -PDOnline -PhysDrv [32:4] -a0
> Adapter: 0: Failed to change PD state at EnclId-32 SlotId-4.
> Exit Code: 0x01
> Is there a way to activate the disk without rebooting the server ?
> Thank you,
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com <mailto:Linux-PowerEdge at dell.com>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Linux-PowerEdge