[Linux-PowerEdge] OMSA Web Interface Login problem

Ray Robert ray.robert at rentrakmail.com
Wed Jul 24 13:31:51 CDT 2013


Have you checked semaphore usage (ipcs -s)?

In situations like this we've found it useful to shut down the OMSA
services using /opt/dell/srvadmin/sbin/srvadmin-services.sh stop.  Then
stop the haldaemon and ipmi services.  Confirm that there are no instances
of haldaemon running; no ipmi module loaded; and confirm OMSA status by
running srvadmin-services.sh status.  Confirm that there are no dsm*
processes running.

Restart the haldaemon service, then srvadmin-services.sh start.
srvadmin-services.sh status should show all OMSA services running.

Ray Robert | Senior Administrator
503.284.7581 ext 242 | ray.robert at rentrak.com
RENTRAK | www.rentrak.com | NASDAQ: RENT

Notice: This message is confidential and is intended only for the
recipient(s) named above. If you have received this message in error, or
are not the named recipient(s), please immediately notify the sender and
delete this message.


On Wed, Jul 24, 2013 at 10:29 AM, H. Haven Liu <haoyangliu at ucla.edu> wrote:

> Hello,
>
> Just to clarify, our problems occurred on two servers that we had fresh
> installs of CentOS 6.4 and OMSA 7.3 on Monday. Servers that we did fresh
> install of CentOS and OMSA early last week were not affected by this issue,
> even after those systems were "yum update"-ed. All of our servers
> (problematic or not) have always used the dell repository.
>
> In our case, we don't even get the "Login failed..." error message, it's
> as if we just refreshed the login page.
>
> Haven
> On Jul 24, 2013, at 5:17 AM, Thomas Speck <Thomas.Speck at smarthouse.de>
> wrote:
>
> > Hi all
> >
> > We have a similar problem on an Ubuntu 10.04 LTS system. We have
> installed everything as on several other servers, but in this case, no
> login is possible.
> >
> > The omarolemap in /opt/dell/srvadmin/etc is edited to include a existing
> using and has the correct permissions, the dms_om_connsvc is up and running
> (and has been restarted several times, as well as a restart of the server),
> but when trying to login we only get "Login failed").
> >
> > The main difference is, that on that server we had previously installed
> the OMSA from http://ftp.sara.nl/pub/sara-omsa and changed to the
> repository version, whereas the working systems were always first installs
> of OMSA.
> >
> > Does anyone have an idea, what may be the source of that problem?
> >
> > Kind regards, Thomas
> >
> >
> > -----Original Message-----
> > From: linux-poweredge-bounces at dell.com [mailto:
> linux-poweredge-bounces at dell.com] On Behalf Of
> linux-poweredge-request at dell.com
> > Sent: Dienstag, 23. Juli 2013 19:00
> > To: linux-poweredge at dell.com
> > Subject: Linux-PowerEdge Digest, Vol 110, Issue 36
> >
> > Send Linux-PowerEdge mailing list submissions to
> >       linux-poweredge at dell.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >       https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> > or, via email, send a message with subject or body 'help' to
> >       linux-poweredge-request at dell.com
> >
> > You can reach the person managing the list at
> >       linux-poweredge-owner at dell.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Linux-PowerEdge digest..."
> >
> >
> > Today's Topics:
> >
> >   1.  OMSA Web Interface Login problem (H. Haven Liu)
> >   2. Re:  poor disk IO - suggestions please? (Faris Raouf)
> >   3. Re:  poor disk IO - suggestions please? (David B.)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Mon, 22 Jul 2013 12:34:51 -0700
> > From: "H. Haven Liu" <haoyangliu at ucla.edu>
> > Subject: [Linux-PowerEdge] OMSA Web Interface Login problem
> > To: linux-poweredge at dell.com
> > Message-ID: <3BA2C960-0110-452E-B6B2-98DF9C4BCDFD at ucla.edu>
> > Content-Type: text/plain; charset=us-ascii
> >
> > Hello,
> >
> > I just reinstalled a NX3100 server with CentOS 6.4, and installed the
> srvadmin-all (v7.3). However, it appears that I am unable to login via the
> web interface.
> >
> > I used the URL <https://my.server.tld:1311>, which prompted me for my
> username and password. I entered root and the root password, and clicked on
> Submit. The page just refreshed, without any error message. There isn't
> anything logged in /etc/secure or
> /opt/dell/srvadmin/var/log/openmanage/omcmdlog.xml. Coincidentally, if I
> use some arbitrary password, same thing would happen.
> >
> > Any idea what might be happening?
> >
> > Thanks,
> >
> > Haven
> >
> >
> >
> > _______________________________________________
> > Linux-PowerEdge mailing list
> > Linux-PowerEdge at dell.com
> > https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20130724/f0df1316/attachment.html 


More information about the Linux-PowerEdge mailing list