[Linux-PowerEdge] OpenManage 7.3 yum repository posted

Luis Nagaki luis.nagaki at gmail.com
Wed Jul 17 09:17:58 CDT 2013


Reboot did not work =(

do you want me to open another email string instead of hijacking yours?
sorry had gotten a bit excited =\

03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2208
[Thunderbolt] (rev 01)
        Subsystem: Dell PERC H710 Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 48
        Region 0: I/O ports at fc00 [size=256]
        Region 1: Memory at d8ffc000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at d8f80000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at d8000000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
                DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
FLReset-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency
L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-,
OBFF Not Supported
                DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-,
LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
                         Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
        Capabilities: [d0] Vital Product Data
                Unknown small resource type 00, will not decode more.
        Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [c0] MSI-X: Enable+ Count=16 Masked-
                Vector table: BAR=1 offset=00002000
                PBA: BAR=1 offset=00003000
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
                CEMsk:  RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+
NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
        Capabilities: [1e0 v1] #19
        Capabilities: [1c0 v1] Power Budgeting <?>
        Capabilities: [190 v1] #16
        Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI)
                ARICap: MFVC- ACS-, Next Function: 0
                ARICtl: MFVC- ACS-, Function Group: 0
        Kernel driver in use: megaraid_sas
        Kernel modules: megaraid_sas





On Wed, Jul 17, 2013 at 10:11 AM, Luis Nagaki <luis.nagaki at gmail.com> wrote:

> Didnt work =\
>
> # omreport storage controller
> No controllers found
>
>  inventory_firmware
> Wait while we inventory system:
> System inventory:
>         Intel(R) Gigabit 2P I350-t LOM = 14.0.12
>         Intel(R) Gigabit 2P I350-t LOM = 14.0.12
>         Intel(R) Gigabit 2P I350-t LOM = 14.0.12
>         12G SEP Firmware  = 1.00
>         WDC WD2003FYYS-1 Firmware = 1d02
>         WDC WD2003FYYS-1 Firmware = 1d02
>         BIOS = 1.4.6
>         WDC WD5003ABYX-1 Firmware = 1s02
>         WDC WD5003ABYX-1 Firmware = 1s02
>         PERC H710 Adapter Controller 0 Firmware = 21.2.0-0007
>
>
>
> ]# update_firmware --yes
>
> Running system inventory...
>
> Searching storage directory for available BIOS updates...
> Checking System BIOS for  - 1.4.6
>         Did not find a newer package to install that meets all
> installation checks.
> Checking Intel(R) Gigabit 2P I350-t LOM - 14.0.12
>         Available:
> pci_firmware(ven_0x8086_dev_0x1521_subven_0x1028_subdev_0x04cf) - 14.0.12
>         Did not find a newer package to install that meets all
> installation checks.
> Checking Intel(R) Gigabit 2P I350-t LOM - 14.0.12
>         Available:
> pci_firmware(ven_0x8086_dev_0x1521_subven_0x1028_subdev_0x04cf) - 14.0.12
>         Did not find a newer package to install that meets all
> installation checks.
> Checking 12G SEP Firmware  - 1.00
>         Did not find a newer package to install that meets all
> installation checks.
> Checking WDC WD2003FYYS-1 Firmware - 1d02
>         Did not find a newer package to install that meets all
> installation checks.
> Checking BIOS - 1.4.6
>         Did not find a newer package to install that meets all
> installation checks.
> Checking WDC WD5003ABYX-1 Firmware - 1s02
>         Did not find a newer package to install that meets all
> installation checks.
> Checking PERC H710 Adapter Controller 0 Firmware - 21.2.0-0007
>         Available:
> pci_firmware(ven_0x1000_dev_0x005b_subven_0x1028_subdev_0x1f35) -
> 21.2.0-0007
>         Did not find a newer package to install that meets all
> installation checks.
>
> This system does not appear to have any updates available.
> No action necessary.
>
>
> will try to reboot. but i restarted the services and also ran the autoconf
>
>
> On Wed, Jul 17, 2013 at 9:43 AM, Luis Nagaki <luis.nagaki at gmail.com>wrote:
>
>> Nice! Will this work maybe for my issue of no controller? :)
>>
>>
>> On Jul 17, 2013, at 8:35 AM, "Rathish_Das at dell.com" <Rathish_Das at dell.com>
>> wrote:
>>
>> Hi All,
>>
>> The OpenManage 7.3  yum repository  has been posted and latest symbolic
>> link is updated.
>>
>> http://linux.dell.com/repo/hardware/latest/
>>
>>
>>
>> You can use this repo to install OMSA 7.3 and update latest firmware’s
>> on PowerEdge servers.
>>
>> * *
>>
>> Thanks,
>>
>> Rathish & Soorej
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20130717/faa393f3/attachment.html 


More information about the Linux-PowerEdge mailing list